The Width Of Lacing Bars In mm Is Kept
By BYJU'S Exam Prep
Updated on: September 25th, 2023
The width of lacing bars in mm is kept
- Equal to nominal rivet diameter
- Twice to nominal rivet diameter
- Thrice to nominal rivet diameter
- Maximum of the above rounded to nearest 5 mm
Table of content
Answer: D. maximum of the above rounded to nearest 5 mm.
The width of lacing bars in mm is kept maximum of the above rounded to nearest 5 mm.
Solution
Minimum width of lacing bars shall not be less than approximately 3 times the diameter of connecting bolt/rivet. Hence, the width of the lacing bar is 3 times the diameter of the river (consider the above value rounded to the nearest 5 mm ). Lacing is generally preferred in case of eccentric loads.
Rivet diameter( in mm) |
Lacing bar ( in mm) |
16 |
50 |
18 |
55 |
20 |
60 |
22 |
65 |
The thickness of the lacing flat for a single lacing system should be less than 1/40 of its effective length and for a double lacing system, it should be less than 1/60 of its effective length.
☛ Related Questions: