Solid Grounding is Adopted for Voltages Below (A) 100 V (B) 200 V (C) 400 V (D) 600 V

By BYJU'S Exam Prep

Updated on: September 25th, 2023

Solid grounding is adopted for voltages below 600 V. Solid grounding is used due to the higher point-of-fault energy levels for voltages below 600 V and for high voltages above 33 kV.

What is Solid Grounding?

When the power transformer, generator, or grounding transformer neutral is linked directly to the ground using a conductor of minimal reactance and resistance, a power system is said to be successfully grounded or securely grounded.

Reactance grounding:

In order to reduce the fault current, this approach inserts a reactance between the neutral and the ground. An increase in transient voltages for this method shows up when there is a fault.

Voltage Transformer Earthing:


The main of a single-phase voltage transformer is linked between the neutral and the earth in this method of neutral earthing.

Pulse transformer

  • For neutral grounding, no pulse transformer is used.
  • A pulse transformer is a transformer that has been improved to produce electrical pulses with high velocity and stable amplitude.
  • For the most part, gate terminal firing circuits in power electronic devices like SCR use pulse transformers, which are essentially 1:1 transformers.
  • It is utilized to separate the high-power circuit for SCR use from the low-power gate firing circuit.


Solid Grounding is Adopted for Voltages Below (A) 100 V (B) 200 V (C) 400 V (D) 600 V

For voltage below 600, solid grounding is adopted. The main reason behind the use of Solid Grounding is higher point-of-fault energy levels.

Our Apps Playstore
SSC and Bank
Other Exams
GradeStack Learning Pvt. Ltd.Windsor IT Park, Tower - A, 2nd Floor, Sector 125, Noida, Uttar Pradesh 201303
Home Practice Test Series Premium