- Home/
- CDS & Defence/
- Article
In simple supported beam main reinforcement is provided at ______ of beam. (a) Top (b) Middle (c) Bottom (d) Anywhere as per site condition
By BYJU'S Exam Prep
Updated on: September 25th, 2023
In simple supported beam main reinforcement is provided at bottom of the beam. The top fibers above the neutral axis in the simply supported beam are under compressive loads. Tensile loads are also applied to the bottom fibers, which are located below the neutral axis. Therefore, below the neutral axis, primary reinforcement is offered.
Table of content
Simple Supported Beam Main reinforcement
Tensile stresses are applied to the top fibers of the cantilever beam, which are located above the neutral axis. Therefore, above the neutral axis, the primary reinforcement is offered.
- Bridges, building beams, and tool beds are some common examples of practical uses for simply supported beams with point loadings.
- Although the quantity and nature of the pressures and moments cancel out for equilibrium, the moments are still significant because they affect stresses, beam curvature, and deflection.
- Additionally, the shearing force and bending moment values typically change along a beam.
Summary:
In simple supported beam main reinforcement is provided at ______ of beam. (a)Top (b)Middle (c)Bottom (d)Anywhere as per site condition
The main reinforcement is provided at the bottom of a basic supported beam. A beam that rests on two supports and is unrestricted in its horizontal movement is said to be simply supported.
