Coal India Limited (CIL) 2022 Syllabus for Civil Engineering

By Himanshu Bajpai|Updated : December 17th, 2019

Coal India Limited (CIL) will invite online applications from eligible candidates for the post of Management Trainees (MTs) through the online exam. The online exam for CIL MT 2022 may be conducted as soon as CIL comes out with notification of MT without the GATE exam. Candidates can view the Syllabus and Pattern of Civil Engineering here below.

Coal India Limited Syllabus for Civil Engineering Paper I

  • Tentative dates of Computer Based Online Test (CBT):
    • November 2022
  • There will be two CBT papers, i.e. Paper-I & Paper-II, which will carry 100 marks each and will be multiple choice questions (MCQ) 
  • Paper-I includes subjects, i.e.:
    • General Knowledge/Awareness
    • Reasoning
    • Numerical Ability 
    • General English
  • Paper-II includes
    •  Professional Knowledge (Discipline related) 
  • Each question will carry 1 mark, and there is no penalty for a wrong answer. 
  • The qualifying marks for the Computer Based Online Test will be as under:
    • GENERAL (UR) / EWS: Minimum 40 marks in each paper
    • OBC (Non-Creamy Layer): Minimum 35 marks on each paper
    • SC / ST / PwD: Minimum 30 marks on each paper

Coal India Limited Syllabus 2022 for Civil Engineering Paper

  • Engineering Mechanics
    • System of forces, free-body diagrams, equilibrium equations; Internal forces in structures
    • Friction and its applications; Kinematics of point mass and rigid body;
    • Centre of mass, Euler’s equations of motion; Impulse-momentum; Energy methods; Principles of virtual work.
    • Solid Mechanics: Bending moment and shear force in statically determinate beams;
    • Simple stress and strain relationships; Theories of failures; Simple bending theory, flexural and shear stresses, shear
  • Solid Mechanics
    • Bending moment and shear force in statically determinate beams;
    • Simple stress and strain relationships; Theories of failures; Simple bending theory,
    • Flexural and shear stresses, shear centre; Uniform torsion, buckling of column, combined and direct bending stresses.
    • Structural Analysis: Statically determinate and indeterminate structures by force/ energy methods; Method of superposition; Analysis of trusses, arches, beams,
  • Structural Analysis
    • Statically determinate and indeterminate structures by force/ energy methods; Method of superposition;
    • Analysis of trusses, arches, beams, cables and frames; Displacement methods: Slope deflection and moment distribution methods;
    • Influence lines; Stiffness and flexibility methods of structural analysis.
    • Construction Materials and Management: Construction Materials: Structural steel - composition, material properties and
  • Construction Materials and Management
    • Construction Materials: Structural steel - composition, material properties and behaviour;
    • Concrete - constituents, mix design, short-term and long-term properties; Bricks and mortar; Timber; Bitumen.
    • Construction Management: Types of construction projects; Tendering and construction contracts; Rate analysis and standard specifications;
    • Cost estimation; Project planning and network analysis - PERT and CPM. Concrete Structures: Working stress, Limit
  • Concrete Structures
    • Working stress, Limit state and Ultimate load design concepts; Design of beams, slabs, columns
    • Bond and development length; Prestressed concrete; Analysis of beam sections at transfer and service loads
    • Steel Structures: Working stress and Limit state design concepts; Design of tension and compression members, beams and beam-columns, column bases
    • Connections - simple and eccentric, beam-column connections, plate
  • Steel Structures
    • Working stress and Limit state design concepts
    • Design of tension and compression members, beams and beam-columns, column bases
    • Connections - simple and eccentric, beam-column connections, plate girders and trusses; Plastic analysis of beams and frames.
  • Soil Mechanics:
    • Origin of soils, soil structure and fabric; Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system
    • Permeability - one-dimensional flow, Darcy’s law; Seepage through soils - two-dimensional flow, flow nets, uplift pressure, piping
    • Principle of effective stress, capillarity, seepage force and quicksand condition; Compaction in laboratory and field conditions; One-dimensional consolidation, time rate of consolidation; Mohr’s circle, stress paths, effective and total shear strength parameters, characteristics of clays and sand.
  • Foundation Engineering:
    • Sub-surface investigations - scope, drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests;
    • Earth pressure theories - Rankine and Coulomb; Stability of slopes - finite and infinite slopes, method of slices and Bishop’s method; Stress distribution in soils - Boussinesq’s and Westergaard’s theories, pressure bulbs;
    • Shallow foundations - Terzaghi’s and Meyerhoff’s bearing capacity theories, the effect of the water table; Combined footing and raft foundation;
    • Contact pressure; Settlement analysis in sands and clays; Deep foundations - types of piles, dynamic and 2/4 static formulae, load capacity of piles in sands and clays, pile load test, negative skin friction.
  • Fluid Mechanics:
    • Properties of fluids, fluid statics; Continuity, momentum, energy and corresponding equations;
    • Potential flow, applications of momentum and energy equations; Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth.
  • Hydraulics:
    • Forces on immersed bodies; Flow measurement in channels and pipes;
    • Dimensional analysis and hydraulic similitude; Kinematics of flow, velocity triangles; Basics of hydraulic machines, specific speed of pumps and turbines;
    • Channel Hydraulics - Energy depth relationships, specific energy, critical flow, slope profile, hydraulic jump, uniform flow and gradually varied flow
  • Hydrology:
    • Hydrologic cycle, precipitation, evaporation, evapotranspiration, watershed, infiltration, unit hydrographs, hydrograph analysis, flood estimation and routing, reservoir capacity, reservoir and channel routing, surface run-off models, ground water hydrology - steady state well hydraulics and aquifers; Application of Darcy’s law.
  • Irrigation:
    • Duty, delta, estimation of evapotranspiration; Crop water requirements;
    • Design of lined and unlined canals, head works, gravity dams and spillways;
    • Design of weirs on a permeable foundation; Types of irrigation systems and irrigation methods; Water logging and drainage; Canal regulatory works, cross-drainage structures, outlets and escapes.
  • Water and Waste Water:
    • Quality standards, basic unit processes and operations for water treatment.
    • Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, and water distribution.
    • Sewage and sewerage treatment, quantity and characteristics of wastewater.
    • Primary, secondary and tertiary treatment of wastewater, effluent discharge standards.
    • Domestic wastewater treatment, the number of characteristics of domestic wastewater, primary and secondary treatment. Unit operations and unit processes of domestic wastewater and sludge disposal.
  • Air Pollution:
    • Types of pollutants, their sources and impacts, meteorology, air pollution control, air quality standards and limits.
  • Municipal Solid Wastes:
    • Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).
  • Noise Pollution:
    • Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution.
  • Transportation Infrastructure:
    • Highway alignment and engineering surveys;
    • The geometric design of highways - cross-sectional elements, sight distances, horizontal and vertical alignments;
    • The geometric design of railway track; Airport runway length, taxiway and exit taxiway design.
  • Highway Pavements:
    • Highway materials - desirable properties and quality control tests;
    • Design of bituminous paving mixes; Design factors for flexible and rigid pavements;
    • Design flexible pavement using IRC: 37-2012; rigid design pavements using IRC: 58- 2011; Distresses in concrete pavements. 
  • Traffic Engineering:
    • Traffic studies on flow, speed, travel time - delay and O-D study, PCU, peak hour factor, parking study, accident study and analysis, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships;
    • Control devices, signal design by Webster’s method; Types of intersections and channelization; Highway capacity and level of service of rural highways and urban roads.
  • Surveying:
    • Principles of surveying; Errors and their adjustment;
    • Maps - scale, coordinate system; Distance and angle measurement - Levelling and trigonometric levelling;
    • Traversing and triangulation survey; Total station; Horizontal and vertical curves.
    • Photogrammetry - scale, flying height; Remote sensing - basics, platform and sensors, visual image interpretation; Basics of Geographical information system (GIS) and Geographical Positioning system (GPS).


CIL Official Website


The Most Comprehensive Exam Prep App!


write a comment

Follow us for latest updates