Time Left - 15:00 mins
Voltage Regulator - 2 Starter Quiz 4
Attempt now to get your rank among 61 students!
Question 1
A 24 V, 600 mW Zener diode can be used for providing a 24 V stabilized supply to a variable load. Assume that for proper zener action, a minimum of 10 mA, must flow through the zener. If the input voltage is 32 V. What would be the value of R and maximum load current?
Question 2
A zener diode is used in the circuit as shown below which has zener dynamic resistance of 15 ohms. The zener knee voltage is 5 V. If the input voltage has a range from 10 V to 20 V then find the output voltage range if R = 200 Ω
Question 3
For the Zener diode network shown below, determine Power dissipated by Zener PZ
Question 4
In the voltage regulator circuit, find power dissipation in Zener diode.
(VZ = 6V and Vi =12 V).
(VZ = 6V and Vi =12 V).
Question 5
The three-terminal linear voltage regulator is connected to a load resistor as shown in figure. If Vin is 10V, what is the power dissipated in the transistor?
Question 6
Consider the voltage series regulator circuit as shown in figure below. Assume that transistors are in active region with VBE = 0.7V & β = 50. If the Zener diode is working in breakdown region with then the output voltage is
Question 7
To maintain the Zener diode in ON state, the maximum values of input voltage Vi is _____ V.
(R = 200 ohm, RL = 10 kohm, VZ = 20 V and (IZ)max = 50 mA]
- 61 attempts
- 0 upvotes
- 0 comments
Jun 23ESE & GATE EE