Time Left - 08:00 mins
UPPCL AE :Circuit Theory Quiz 6
Attempt now to get your rank among 30 students!
Question 1
If a series RLC circuit resonates at 1.5 kHz and consumes 100 watts from a 100 volts AC source operating at resonant frequency with a bandwidth of 0.75 kHz; the values of R, L and Q-factor of the circuit are respectively
Question 2
Suppose a circuit with impedance with magnitude 10 and an angle of 60° is supplied by voltage of v(t) = 20 sin (ωt + θ). The circuit is switched at t = 0. Find the value of θ in radians for eliminating AC transients from the circuit.
Question 3
When a 240 V, 50 Hz supply is applied to a combination of a resistor 15 Ω in parallel with an inductor having the total current of 22.1 A. What value must the frequency have for the total current to be 34.0 A.
Question 4
Consider the circuit shown below:
The value of capacitance C required to make circuit power factor unity is:
Question 5
The input power factor for circuit having voltage 100∠0° and Yeq = 0.0224∠27.01°.
Question 6
Calculate i(t) for t > 0, in the circuit shown in figure below
Question 7
A coil having resistance of 10 ohm and inductance of 1 H is switched on to a direct voltage of 100 V. Calculate the rate of change of the current at t= time constant.
Question 8
At a junction,3 currents I1, I2, I3 are meeting. Assume all the currents are entering the node.
If I1= -6sin(t)mA and I2 = 8cos(t)mA, then I3 will be
If I1= -6sin(t)mA and I2 = 8cos(t)mA, then I3 will be
Question 9
What is the applied voltage in a series R L circuit voltage across resistor and inductor are 3v and 4 v respectively?
Question 10
What is voltage across capacitor In ac RC series circuit total voltage is 10V and voltage across resistor is 6V?
- 30 attempts
- 0 upvotes
- 0 comments
Tags :
AE & JE ExamsMay 5AE & JE Exams