Time Left - 06:00 mins
SSC JE ME QUIZ_ Strength of Material Booster Quiz-10
Attempt now to get your rank among 122 students!
Question 1
What will be the thermal stress (in MPa) developed in a rod with both ends fixed and having a diameter of 4 cm and length of 2 m,if experiences heating from temperature 50oC to 200oC. The coefficient of thermal expansion is α = 10 × 10-6/oC and young’s modulus is 250 GPa?
Question 2
Which of the following is the CORRECT bending moment diagram for the cantilever beam carrying uniformly varying load from zero at free and w/unit length at the fixed end?
Question 3
The constant ‘a’ in Rankine formula for the critical load of column is ______.
Question 4
A Hollow shaft of outer diameter 80 mm and inner diameter of 40 mm is to be replaced by a solid shaft to transmit the same torque at the same maximum stress. The diameter of solid shaft should be ____ mm.
Question 5
The Mohr’s circle for the given state of stress will be:
Question 6
The analysis of thick cylinder is based on ___________ and variation of hoop stress across the thickness of a thick cylinder is _________.
Question 7
A 0.4 mm belt goes over a frictionless pulley of 30 mm diameter. If E of the material is 80 GPa, then the maximum stress induced in the belt is:
Question 8
Transverse shear stress distribution for a beam is shown below at a cross section.
Identity the X-s/c of the Beam.
Question 9
The slope and deflection of beams can be decreased by
Question 10
All theories of failure will give same result under.
- 122 attempts
- 0 upvotes
- 0 comments
Oct 28AE & JE Exams
