Time Left - 06:00 mins

SSC JE ME Quiz_Strength of Material Booster Quiz-9

Attempt now to get your rank among 134 students!

Question 1

In a compression test, the fracture in cast iron specimen would occur along

Question 2

Rankine formula which accounts for direct as well as buckling stress is applicable to

Question 3

A Rectangular column of dimensions 20 mm × 30 mm has a length of 2 m. The slenderness ratio of the column will be:

Question 4

A shaft of diameter D is subjected to a torque T. To have the angle of twist four times as that before, the percentage reduction in diameter needed is ________.

Question 5

What are the co-ordinates of center of Mohr’s circle for an element subjected to two mutually perpendicular stresses one tensile of magnitude 80MPa and other compressive of magnitude 50MPa?

Question 6

Where does the maximum hoop stress in a thick cylinder under external pressure occur?

Question 7

A steel I-beam has overall depth of 40 cm. If the bending stresses developed at the top and bottom of beam are 120 MPa tensile and 40 MPa compressive respectively, then depth (in cm) of neutral axis from bottom of beam will be ____.

Question 8

A beam having rectangular cross-section is subjected to external loading. The maximum shear stress developed in the beam is greater than the average shear stress by

Question 9

A cantilever beam carries a uniform distributed load of w kN/m. as shown in figure. What will be deflection at free end?

Question 10

Ratio of strain energy stored by solid shaft of diameter ‘D’ and strain energy stored by hollow shaft (external diameter ‘D’ and internal diameter ‘d’) is given by:
  • 134 attempts
  • 1 upvote
  • 0 comments
Oct 31AE & JE Exams