Time Left - 06:00 mins

SSC JE CE Quiz_RCC Design Booster Quiz-9

Attempt now to get your rank among 276 students!

Question 1

The span to depth ratio limit is specified in IS: 456 – 2000 for the reinforced concreted beams, in order to ensure that the:

Question 2

The main reinforcement of a RC slab consists of 10 mm bars at 10 cm spacing. If it is desired to replace 10 mm bars by 12 mm bars, then the spacing of 12 mm bars should be ______.

Question 3

Flexural collapse in over reinforced beams is due to

Question 4

Lateral ties in RCC columns are provided to resist

Question 5

At what flexural stress, the first crack in RCC member made of M40 concrete will occur?

Question 6

In a retaining wall, the counterforts are used to support the

Question 7

A cantilever beam of size 230 × 400 mm has a clear span of 2.5 m and is supported on a 400 × 400 mm column. The effective span of the cantilever is

Question 8

For limit state of collapse, the partial safety factors recommended by IS 456:2000 for estimating the design strength of concrete and reinforcing steel are respectively

Question 9

If steel reinforcement is provided in a beam having yield strength 230 MPa. The modulus of elasticity of steel is 200 GPa. Then maximum strain in tension reinforcement (As per LSM) in the section at shall not be less than:

Question 10

What is the anchorage value of a standard hook of a reinforcement bar of diameter D?

276 attempts
0 upvotes
0 comments

Tags :

AE & JE Exams

Nov 1AE & JE Exams