Time Left - 08:00 mins
SSC JE 2019-20: Technical Quiz 42
Attempt now to get your rank among 1192 students!
Question 1
A circular shaft can transmit a torque of 5kNm. If the torque is reduced to 4kNm, then the maximum value of bending moment that can be applied to the shaft is
Question 2
The force in BC of the truss shown in the figure below is
Question 3
Size of Mists are usually
Question 4
The advantage of prestressed concrete over an equivalent RCC member is
Question 5
The_________ soil transported by the gravitational forces
Question 6
A sample of cement is said to be sound when it does not contain free
Question 7
A building has been purchased by a person at a cost of Rs. 25,000. The useful life of the building is 40 years and the scrap value of the building is Rs. 3,000. Calculate the annual sinking fund (Rs.) at the rate of 5% interest.
Question 8
Calculate the volume of the earthwork (in cubic meter) using trapezoidal method if the cross section areas of the three section of embankment at an interval of 20 m are 40 square meters, 50 square meters and 80 square meters.
Question 9
A propped cantilever beam of span l and constant plastic moment capacity Mp carries a concentrated load at mid-span. The load at collapse will be
Question 10
Calculate the safe stopping sight distance (in m) for the descending gradient of 3% for a design speed of 80 km/h. Take coefficient of friction as 0.35 and total reaction time as 2 seconds.
- 1192 attempts
- 3 upvotes
- 11 comments
Tags :
ESE & GATE CEGeneralSep 18ESE & GATE CE