Time Left - 10:00 mins
RSMSSB JE Quiz 12
Attempt now to get your rank among 274 students!
Question 1
In the circuit shown in figure below, breakdown voltage of zener diode is 5 V, if IZ(min) = 2.5 mA and IZ(max) = 8 mA, then find the minimum value of resistor R1?
Question 2
For the given configuration of 2:1 MUX with 4:1 MUX, what will be the output at Y?
Question 3
The block diagram of a system as shown in figure below, determine the transfer function, Y(s)/X(s).
Question 4
Buchholz’s relay is used in:
Question 5
The full load output current when the maximum efficiency for a transformer having core loss of 200 W occurs at 80% loading and equivalent resistance referred to secondary of 2.5 Ω is:
Question 6
For finding Vs and VR, the capacitance is neglected in which of the following line?
Question 7
If per unit impedance Zp.u. on a base of 33 kV and 100 MVA is 0.25 p.u., then what will be the per unit impedance on 22 kV and 50 MVA base values.
Question 8
Which damping is used in to produce damping torque in moving iron instrument?
Question 9
Efficiency of power transfer when maximum transfer of power occur will be:
Question 10
In a magnetically coupled circuit having L1 = 2 H, L2 = 6 H and the mutual inductance between L1 and L2 is 2 H. Then calculate the value of coupling coefficient ‘k’?
- 274 attempts
- 0 upvotes
- 1 comment
Tags :
AE & JE ExamsNov 24AE & JE Exams