Time Left - 12:00 mins
BARC OCES 2022 Quiz 20
Attempt now to get your rank among 50 students!
Question 1
The maximum bending moment due to a train of wheel loads on a simply supported girder.
Question 2
The Influence Line Diagram (ILD) for a force in a truss member is shown in the figure. If a Uniformly Distributed Load (UDL) of intensity of 30 kN/m longer than the span traverses, then the maximum compression in the member is
Question 3
Muller-Breslau Principle for influence line is applicable for
Question 4
The influence line for bending moment at section X(MX) at a distance of 4 m from the left support of a simply supported girder AB is shown in figure below. A uniformly distributed load of intensity 2 t/m longer than the span crosses the girder from left to right.
The max bending moment at section X is equal to:
Question 5
Two concentrated loads of 50 kN each spaced at 4 meter across a simply supported girder of span 8 m. The absolute maximum bending moment in the girder is
Question 6
For a 2–hinged arch, if one of the supports settles down Vertically, then the horizontal thrust
Question 7
In a spherical dome subjected to concentrated load at crown or uniformly distributed load, the meridional force is always
Question 8
In a two – hinged arch, an increase in temperature induces
Question 9
A symmetrical two – hinged parabolic arch when subjected to a uniformly distributed load on the entire horizontal span, is subjected to
Question 10
A circular segmental three-hinged arch of span 28 m and a rise of 4 m hinged at the crown and springing it carries a horizontal load of 100 N/m covering full height of the arch on right side. The horizontal thrust on the left springing will be
- 50 attempts
- 0 upvotes
- 0 comments
Tags :
ESE & GATE CEGeneralJun 6ESE & GATE CE