Time Left - 15:00 mins
GATE Prev Year : Machine Design Test-5
Attempt now to get your rank among 551 students!
Question 1
The S-N curve for steel becomes asymptotic nearly at
Question 2
Two mating spur gears have 40 and 120 teeth respectively. The pinion rotates at 1200 rpm and transmits a torque of 20 N.m. The torque transmitted by the gear is
Question 3
A block–brake shown below has a face width of 300 mm and a mean co–efficient of friction of 0.25. For an activating force of 400 N, the braking torque in Nm is
Question 4
The life of a ball bearing at a load of 10 kN is 8000 hours. Its life in hours, if the load is increased to 20 kN, keeping all other conditions the same, is
Question 5
A bracket (shown in figure) is rigidly mounted on wall using four rivets. Each rivet is 6mm in diameter and has an effective length of 12mm.
Direct shear stress (in MPa) in the most heavily loaded rivet is
Direct shear stress (in MPa) in the most heavily loaded rivet is
Question 6
A bolt of major diameter 12 mm is required to clamp two steel plates. Cross sectional area of the threaded portion of the bolt is 84.3mm2. The length of the threaded portion in grip is 30 mm, while the length of the unthreaded portion in grip is 8 mm. Young's modulus of material is 200 GPa. The effective stiffness (in MN/m) of the bolt in the clamped zone is ______
- 551 attempts
- 1 upvote
- 25 comments
Sep 7ESE & GATE ME