Time Left - 20:00 mins
GATE EE : Electromagnetic fields Champion Quiz 2
Attempt now to get your rank among 280 students!
Question 1
A combination of 1 mF capacitor with an initial voltage Vc(0) = ‒2 V in series with a 100 W resistor is connected to a 20 mA ideal dc current source by operating both switches at t = 0 s as shown. Which of the following graphs shown in the options approximates the voltage vs across the current source over the next few seconds?
Question 2
Two semi-infinite dielectric regions separated by a plane boundary at y = 0. The dielectric constant of region 1(y < 0) and region 2 (y > 0) are 2 and 5, respectively. Region 1 has uniform electric field , where and are unit vectors along the x, y and z axes, respectively. The electric field in region 2 is
Question 3
A capacitor of 4700 µF is connected in a circuit. Once the capacitor is charged, find the charge on positive plate of capacitor?
Question 4
If a current carrying wire is pulled from conducting loop as shown, then what will be the direction of current along wires?
Question 5
The charge distribution in a metal-dielectric-semiconductor specimen is shown in the following figure. The negative charge density decreases linearly in the semiconductor as shown. The electric field distribution is as shown in
Question 6
A capacitor is made with a polymeric dielectric having an εr of 2.26 and a dielectric breakdown strength of 50 kV/cm. The permittivity of free space is 8.85 pF/m. If the rectangular plates of the capacitor have a width of 20 cm and a length of 40 cm, then the maximum electric charge in the capacitor is
Question 7
A dielectric slab with 500 mm × 500 mm cross–section is 0.4 m long. The slab is subjected to a uniform electric field of E = 6ax + 8ay kV/mm. The relative permittivity of the dielectric material is equal to 2. The value of constant ε0 is 8.85 × 10–12 F/m. The energy stored in the dielectric in Joules is
Question 8
A capacitor consists of two metal plates each 500 × 500 mm2 and spaced 6mm apart. The space between the metal plates is filled with a glass plate of 4mm thickness and a layer of paper of 2mm thickness. The relative permittivities of the glass and paper are 8 and 2 respectively. Neglecting the fringing effect, the capacitance will be (Given that ε0 = 8.85 × 10–12 F/m)
Question 9
A composite parallel plate capacitor is made up of two different dielectric materials with different thickness (t1 and t2) as shown in Fig. The two different dielectric materials are separated by a conducting foil F. The voltage of the conducting foil is
Question 10
A parallel plate capacitor is partially filled with glass of dielectric constant 4.0 as shown below. The dielectric strengths of air and glass are 30 kV/cm and 300 kV/cm, respectively. The maximum voltage (in kilovolts), which can be applied across the capacitor without any breakdown, is ______.
- 280 attempts
- 2 upvotes
- 15 comments
Jun 20ESE & GATE EE