Time Left - 12:00 mins

GATE CE 2022 Toppers Quiz 7

Attempt now to get your rank among 169 students!

Question 1

If the effective depth and effective cover of a deep continuous beam is 600 mm and 50 mm respectively, then its maximum effective length will be ____ mm.

Question 2

If , then A2 is equal to

Question 3

Water flows from a lake into a steep rectangular channel of 2 m width. If the discharge from take is 20 m3/s then critical depth of flow (in m) is –

Question 4

The relative density of a granular soil sample is 56.6% at its natural void ratio of 0.45.
If the void ratio at its loosest state is 0.60, then the difference of void ratio at their densest and loosest state will be

Question 5

For the given network, after 15 days the updated status of the projects was given as:
Activities 1-2, 2-5, and 1-3 are completed.
Activity 2-4 has 5 days remaining.
Activity 5-8 has 3 days remaining.
Activity 5-6 has 2 days remaining.
Activity 3-6 has 6 days remaining.

The completion time of the project is

Question 6

A circular shaft transmitting 100 kW of power at 150 rpm is supported in bearings that are 4 meters apart. At the mid span, it carries a pulley that exerts a transverse load of 16 kN on the shaft. Determine the minimum diameter of the shaft if the stress acting alone would produce the maximum strain, is not exceeding 120 N/mm2 and the poisson’s ratio is 0.25 .

Question 7

An ascending gradient of 1 in 50 meets a descending gradient of 1 in 40. What is the length (in m) of vertical summit curve for a stopping sight distance of 200 m?
[Assume height of eye level of driver above roadway surface = 1.2 m, Height of object above the pavement surface = 0.15 m]

Question 8

Two prismatic beams having the same flexural rigidity of 1000 KN-m2 are subjected to loading as shown below.

If the slopes at the left support of these beams are denoted by θ1 and θ2 (as indicated in the figures) the correct option is

  • 169 attempts
  • 0 upvotes
  • 0 comments
Jun 5ESE & GATE CE