Time Left - 12:00 mins
GATE CE 2022 Toppers Quiz 3
Attempt now to get your rank among 156 students!
Question 1
A steel is subjected to principal stresses of 90 N/mm2, 50 N/mm2 and 30 N/mm2. If the F.O.S. is 2 and Poisson’s ratio is 0.3, then the yield stress as per maximum strain energy theory is
Question 2
The kinematic determinacy of the portal frame consider members are inextensible is ?
Question 3
The flexibile plate load test conducted with 30 cm diameter plate on soil subgrade yielded a deflection of 0.25 cm under a stress of 600 kg/cm2. The modulus of elasticity of the subgrade soil (in kg/cm2) is
Question 4
On a broad gauge rail line for a 3 degree curve the equilibrium cant is provided for a speed of 80 kmph is-
Question 5
A prestressed concrete beam of rectangular section 150 mm by 300 mm and span 8 m is axially prestressed by a tendon carrying an effective force of 200 kN. The beam supports a U.D.L of 7.5 kN/m including its self weight. The principal stresses (in MPa) are
Question 6
A T-beam roof section has the following particulars:
Thickness of slab = 100 mm
Width of rib = 300 mm
Depth of rib = 500 mm
Centre to centre distance of beam = 3.0 m
Effective span of beam = 6.0 m
Distance between points of contraflexure = 3.6 m
The effective flange width of the T-beam is ___________ mm.
Thickness of slab = 100 mm
Width of rib = 300 mm
Depth of rib = 500 mm
Centre to centre distance of beam = 3.0 m
Effective span of beam = 6.0 m
Distance between points of contraflexure = 3.6 m
The effective flange width of the T-beam is ___________ mm.
Question 7
A sand deposit contains 3 distinct horizontal layers of equal thickness. The hydraulic conductivity of the upper and lower layers in 10-3 cm/sec. and that of middle layer is 10-2 cm/sec. What is the ratio of horizontal & vertical conductivities of the three layers.
Question 8
A soil suspension was mode, (having volume 1 litre) with sample of dry soil (G = 2.7) weighing 200g. In pipette method of sedimentation analysis. 10 ml suspension was removed from a depth of 25 cm. after 3 min. from starting. The dry unit weight of sample is for 0.4 g Given and centipoise.
Find the diameter of setting particle
Find the diameter of setting particle
- 156 attempts
- 1 upvote
- 0 comments
Tags :
ESE & GATE CEGeneralDec 14ESE & GATE CE