Time Left - 12:00 mins

GATE CE 2022 Toppers Quiz 27

Attempt now to get your rank among 56 students!

Question 1

Find the maximum bending moment occuring at the point C due to a moving uniform load of 2 kN/m having a length of 3 m.

Question 2

Which of the following ILD is incorrect for the given beam?

Question 3

The influence line diagram for the force in member XY of the truss shown in fig. will be

Question 4

If span of a uniform propped cantilever beam is 12 m then the area of influence line diagram for the reaction at the hinged end is _______.

Question 5

A load 2w is moving from left to right support on a simply supported beam AB of span L.The maximum bending moment at 0.3L from left support is

Question 6

The 2-day and 4-day BOD values of a sewage sample are 100 mg/L and 155 mg/L, respectively. The value of BOD rate constant (expressed in per day) is ___________

Question 7

The width of the expansion joint is 20mm in a cement concrete pavement. The laying temperature is 20 °C and the maximum slab temperature in summer is 60 °C. The coefficient of thermal expansion of concrete is 10 x 10^–6 mm/mm / °C and the joint filler compresses upto 50% of the thickness. The spacing between expansion joints should be

Question 8

A traffic survey conducted on a road yields an average daily traffic count of 5000 vehicles. The axle load distribution on the same road is given in the following table

$Description: D:\GradeStack Courses\GATE Tests (Sent by Ravi)\Civil-Engineering-2014_files\image298.png$
The design period of the road is 15 years, the yearly traffic growth rate is 7.5% and the load safety factor (LSF) is 1.3. If the vehicle damage factor (VDF) is calculated from the above data, the design traffic (in million standard axle load, MSA) is ________. (standard axle load = 8160kg ∼ 8.2 tonnes)

56 attempts
0 upvotes
0 comments

Tags :

ESE & GATE CE General

Dec 12ESE & GATE CE