Time Left - 12:00 mins
GATE CE 2022 Toppers Quiz 20
Attempt now to get your rank among 132 students!
Question 1
The effective length of fillet weld with 8mm size weld is 234 mm, then the overall length of fillet weld is
Question 2
Match List-I (Item) with List-II (Features) and select the correct codes
Question 3
Rate of oxidation of organic matter depends upon
Question 4
The standard atmospheric pressure is 101.325kPa. The local atmospheric pressure is 96.13kPa. If pressure of a flow is recorded is 13.18kPa(gauge),it is equivalent to(abs kPa)?
Question 5
What will be the maximum depth(m) of excavation possible with a vertical face in a clay soil which has 
and 
. (Assume Sn = 0.230 and FOS = 1)
and . (Assume Sn = 0.230 and FOS = 1)Question 6
A beam of square cross section is placed horizontally with one diagonal as shown in figure below. It is subjected to a vertical shear force acting along the depth of the cross section. Maximum shear stress across the depth of cross section occurs at a depth ‘x’ from the top. what is the value of x?
Question 7
A concrete beam of size 500mm*280mm reinforced with 4 bars of steel of diameter 20mm.Thr grade of concrete and steel is M20and Fe-415.What is the depth (in mm) of neutral axis from top extreme fibre?
Question 8
The stiffness matrix of a beam element is 
. Which of the following is its flexibility matrix?
. Which of the following is its flexibility matrix?- 132 attempts
- 0 upvotes
- 0 comments
Tags :
ESE & GATE CEGeneralJan 1ESE & GATE CE
