Time Left - 20:00 mins

GATE 2023 Power Electronics Evaluation Quiz 11

Attempt now to get your rank among 48 students!

Question 1

A 3 - full converter bridge is connected to supply voltage of 230 V per phase and a frequency of 50 Hz. The source inductance is 4 mH. The load current on dc side is constant at 20 A. If the load consists of a dc source of internal emf 400 V with internal resistance of 1 Ω then firing angle is______ in degree?

Question 2

In a 3-phase rectifier circuit, Thyristor numbered 1, 2 and 3 are connected respectively R, Y and B phases of the star-connected transformer secondary. When the current is being commutated from thyristor no.1 to no.2, the effect of the transformer leakage and the ac system inductance will be such that it will_____

Question 3

Overlap angle (μ) will increase with increase in which of the following  quantities?
1. Frequency

2. Firing angle

3. Inductance

4. Voltage applied

5. Type of Battery

Question 4

The length of overlap period can be decreased by

Question 5

Which of the following expression relates the firing angle (), extinxtion angle () and the overlap angle () of a phase controlled rectifier?

Question 6

In the Circuit shown below, RMS value of VS1 and VS2 are 120 volts at 60 Hz. The two sources are 180 out of phase and given Ls = 5mH and I0 = 10 A, then the average output voltage Vo at 45° firing angle is

Question 7

A 3-phase fully controlled converter is fed from 400 V, 50 Hz mains for a firing angle of 60°, output voltage is 250 V. Calculate load resistance, source inductance & overlap angle. The load current is 25 A.

Question 8

A single phase full converter operator at a firing angle of 45° and connected to 220V, 50Hz supply. The total load current is constant at 3A and load voltage is 130V. What is the value of source inductance (mH)?
  • 48 attempts