Time Left - 15:00 mins
GATE 2023 II Kinematic and Dynamic Analysis II Quiz 26
Attempt now to get your rank among 88 students!
Question 1
If the ratio of the length of a connecting rod to the crank radius increases then
Question 2
In case of dynamic analysis of single slider crank mechanism, crank effort is given by_____. ( F is the piston effort and β and θ are the angles made by the connecting rod and the crank with the line of sliding of the slider respectively)
Question 3
For a single slider crank mechanism, the velocity and acceleration of the piston at inner dead centre will be _____.( w is angular velocity of the crank and r its radius )
Question 4
In a slider crank mechanism the crank rotates with uniform angular velocity. The angular acceleration of connecting rod will zero when the____.
Question 5
In case of dynamic analysis of single slider crank chain, the normal thrust to the cylinder walls is given by_____?
where F is the piston effort and
is the angle made by the connecting rod with the line of sliding of the slider
where F is the piston effort and
is the angle made by the connecting rod with the line of sliding of the slider Question 6
In an IC engine r= 20cm, l= 120cm. At the instant when connecting rod and crank are perpendicular to each other the turning moment is 2kN-mm. The axial force in connecting rod ...N
- 88 attempts
- 0 upvotes
- 0 comments
Sep 19ESE & GATE ME
