Time Left - 18:00 mins
GATE 2022 Rapid Revision Quiz 13
Attempt now to get your rank among 115 students!
Question 1
Find the output voltage V0 of the circuit is _____
If all transistor have same VBE = 0.7 Volt
Question 2
A mixer stage has a noise figure of 20dB, and this is preceded by an amplifier that has a noise figure. of 10 dB and an available power gain of 16dB. Calculate the overall noise figure referred to the input ____
Question 3Multiple Correct Options
An AB Flip-flop is designed using JK FF which of the following can be Boolean function for the input of JK Flip-Flop, consider the truth table of AB Flip-flop as given below:
Question 4
Consider the below two port network. The parameter of the network is equal to?
Question 5
A digital signal processing system is described by the expression:
y(n) = 2x(n) + x(n–4) + 2y(n–1)
The system is:
Question 6
A open loop transfer function of a unity negative feedback control system is given by, G(S) = . An integral controller having transfer function GC(s) = is connected in the forward path of the system, to obtain a peak overshoot of 25% the value of the system gain ‘k’ is
Question 7
A 100 MHz electrical field travelling in dielectric of region 1 is normally incident on a boundary with dielectric region 2. The representation for the incident electric field (in the first dielectric) is exp (-j10z). The velocity in the second dielectric is m/sec. Both dielectric are characterized by .
The intrinsic impedance of electrical of region 1 is
Question 8
The donor and acceptor impurities in an abrupt junction silicon diode arc 1016/cm3 and 4 × 1018/cm3 respectively. Assume that the intrinsic carrier concentration in silicon ni = 1.5 × 1010/cm3 at 300°K. and permittivity of silicon εsi = 1.04 × 10–12 F/cm. The built in potential and the depletion width of the diode under thermal equilibrium condition respectively are.
- 115 attempts
- 0 upvotes
- 0 comments
Tags :
ESE & GATE ECGeneralJan 28ESE & GATE EC