Time Left - 15:00 mins
GATE 2019: Power Electronics Quiz 5 (App update required to attempt this test)
Attempt now to get your rank among 465 students!
Question 1
A single phase full bridge converter with a free wheeling diode feeds an inductive load. The load has large inductance, hence, the output current is constant. The load also consists of a resistance of 11.3Ω. The input voltage source is a 220V, 50Hz source. For a firing angle delay of 450, find the average value of freewheeling diode current.
Question 2
A 1-Φ voltage controller is employed for controlling the power flow from 230 V source into a load circuit R=5Ω and ωL=7Ω. calculate the power factor of source for delivering the maximum power of load.
Question 3
A single-phase half-controlled rectifier is driving a separately excited dc motor. The dc motor has a back emf constant of 0.5 V/rpm. The armature current is 5A without any ripple. The armature resistance is 2 Ω. The converter is working from a 230 V, single-phase ac source with a firing angle of 30o. Under this operating condition, the speed of the motor will be
Question 4
A single phase transformer, with secondary voltage of 230 V, 50 Hz, delivers power to load R = 10 Ω through a half wave controlled rectifier circuit. If the firing angle is 60 ° then the rectification efficiency is ------ %.
Question 5
A battery is being charged through a half-wave rectifier as shown in figure.
If the average charging current is assumed to be constant at 5 A then the value of current limiting resistance R is ______ Ω.
If the average charging current is assumed to be constant at 5 A then the value of current limiting resistance R is ______ Ω.
Question 6
For the element values given in the circuit, and the initial current through the inductor is . Initial voltage across the capacitor . The values of conduction time of thyristor and capacitor voltage after thyristor is turned OFF are
- 465 attempts
- 4 upvotes
- 4 comments
Jun 16ESE & GATE EE