Time Left - 10:00 mins
ESE ME: Strength of Materials Champion Quiz 5
Attempt now to get your rank among 712 students!
Question 1
If a material expands freely due to heating, it will develop
Question 2
A steel specimen 150 mm2 in cross-section stretches by 0.05 mm over a 50 mm gauge length under an axial load of 30 kN. What is the strain energy stored in the specimen?
(Take E = 200 GPa)
(Take E = 200 GPa)
Question 3
The figure shown is an example of _________rosettes
Question 4
The “Jominy test” is used to find
Question 5
What is the expression for the strain energy due to bending of a cantilever beam (length L, modulus of elasticity E and moment of inertia I?)
Question 6
A helical compression spring of stiffness K is cut into two pieces, each having equal number of turns and kept side-by-side under compression. The equivalent spring stiffness of this new arrangement is equal to
Question 7
A hallow shaft of the same cross-section area and material as that of a solid shaft, transmits:
Question 8
The boring bar of a boring machine is 25 mm in diameter. During operation, the bar gets twisted through 0.01 radians and is subjected to a shear stress of 42 N/mm2. The length of the bar is (taking G = 0.84 ×105 N/mm2)
Question 9
A column fixed at both ends has a rectangular cross-section of 10mm×20mm and a length of 1m. The slenderness ratio of the column is close to
Question 10
The figure shown below represents the BM diagram for a simply supported beam
The beam is subjected to which one of the following?
The beam is subjected to which one of the following?
- 712 attempts
- 2 upvotes
- 49 comments
Aug 14ESE & GATE ME