Time Left - 12:00 mins

ESE 2022 CE Technical Quiz 30

Attempt now to get your rank among 332 students!

Question 1

Which process comes after batching in manufacture process of concrete?

Question 2

For estimation of painted area of semi corrugated asbestos cement sheets, percentage increase in area above plain area is _____.

Question 3

The maximum permissible vertical deflection of a simply supported beam in non industrial buildings if the element is susceptible for cracking is:

Question 4

In T-shaped RCC retaining walls, the main reinforcement in the stem is provided on:

Question 5

A soil sample has bulk density of 21 kN/m³ and water content 8%. Dry density of the sample is:-

Question 6

For a uniform flow with depth of 0.6 m and Froude number of 2.0 in a rectangular channel, the specific energy will be:-

Question 7

What is the chemical symbol for ice as per UNESCO terminology?

Question 8

What is the moisture depth available for evapotranspiration in the root zone of 1.5m depth soil, if the dry weight of the soil is 1.5 g/cc, field capacity is 30% and the permanent witting point is 12%?

Question 9

A roundabout is provided with an average entry width of 8.4 meter, width of weaving section as 14 m and length of the weaving section between channelizing islands as 35 m. The crossing traffic and total on the weaving section are 1000 and 2000 PCU per hour respectively. The nearest rounded capacity of the roundabout (in PCU per hour) is:

Question 10

The RL of the floor in a building is 100.00 m and the staff reading on the floor is 1.40 m. If the reading on the staff when held inverted with bottom touching the T-Beam of the slab is 3.60 m, then the height of the T-Beam bottom above the floor is equal to

332 attempts
0 upvotes
1 comment

Tags :

ESE & GATE CE General

Oct 22ESE & GATE CE