Time Left - 12:00 mins

ESE 2022 CE Technical Quiz 23

Attempt now to get your rank among 318 students!

Question 1

The ratio of moment of inertia about the neutral axis to the distance of te most distant point of the section from the neutral axis is called ____.

Question 2

The fixed support in a real beam becomes in the conjugate beam as:-

Question 3

A fixed base symmetrical frame is shown in the figure write slope deflection equation for moment at B for member AB:

Question 4

The tolerance in the width of mould of a class I brick is about:

Question 5

One of the main disadvantages of the bar chart for construction management is:

Question 6

In a single-acting reciprocating pump, the acceleration head at the beginning of the suction stroke is 3.5m. If the pump is 1.5m below the water level in the supply reservoir, the pressure head at the cylinder reservoir, the pressure head at the cylinder at that instant, considering the atmospheric pressure as 10.0m is

Question 7

What is the food to micro-organism ratio in an aeration tank having following data?

Flow = 1 MLD, MLSS = 2000 mg/L Influent BOD₅ = 200 mg/L

Volume of aeration tank = 500 m³

Question 8

By using Bligh’s theory for the design of floor if residual head at any section is 0.42 m and specific gravity of material is 2.4, what will be thickness of floor?

Question 9

Determine the safe slopping flight distance for design speed of 14 m/s for two-way traffic on a two lane road assuming the coefficient of friction as 0.28 and a reaction time of 2 seconds.

Question 10

The ratio of focal length of the objective to stadia interval is called _______

318 attempts
0 upvotes
0 comments

Tags :

ESE & GATE CE General

Oct 13ESE & GATE CE