Time Left - 18:00 mins
EC QUIZ -2
Attempt now to get your rank among 156 students!
Question 1
Consider a 300Ω quarter-wave long (at 1 GHz) transmission line as shown in Figure. It is connected to a 10V, 50Ωsources at one end and is left open circuited at the other end. The magnitude of the voltage at the open circuit end of the line is
Question 2
Find out the value of x in the following equation
(21)x = log2 (11202)x
Question 3
In the signal flow graph shown in the figure the gain C/R is
Question 4
In the given figure, Zin at the generator is
Question 5
Let x(n) = {2, 4, 8}. The z-transform of the signal y(n) = x(n – 0.5) is (use linear interpolation if required)
Question 6
If the following signal S(t) is applied to a matched filter which is matched to the input pulse S(t) then the peak amplitude of the signal at the output will be
Question 7
Consider an ideal n-channel MOSFET with parameter L = 1.25 μm, μn = 650 cm2/V-S ,Cox = 6.9 × 10–8 F/cm2 and VT = 0.65 V is in saturation
If drain current is 4mA and gate voltage VG is 5V So the channel width of the MOSFET is
Question 8
Consider the zener diode circuit shown in figure below with Vz = 6 V and zero zener resistance and knee current of 5 mA. The minimum value of 'R' so that the voltage across it does not fall below 6 V is
Question 9
For a given P+ - N Si junction diode with ND = 1015 cm-3 and ni= 1010 cm-3 Find the electric field at the midpoint of the depletion region on the n-side. (let reverse bias voltage = 100V)
Question 10
A sample function x(t) is a random process consists of 1 and 0 shown below by pulses of amplitude +A and -A with duration T. The sample value for uniform distribution of random variable Td is td probability density function defined by
Find autocorrelation function of x(t).
- 156 attempts
- 0 upvotes
- 0 comments
Tags :
ESE & GATE ECGeneralNov 19ESE & GATE EC