Calculation of Standard Axle Loads -Quiz Starter Quiz

Current traffic volume for 6 lane highway is shown below. A pavement with design life of 15 years is needed to build. If Traffic volume will grow linearly by 25 % (assuming linear increase) over next 15 years and lane distribution factor (upto two decimal places) for lane 4 is _____. 
Design ESAL for lane 4=15682035

The result of one day axle load of trucks on a road is given below. Find the number of repetition of standard 80KN axle in a year (nearest integer)

For an axle load of A tonne on a road, the Vehicle Damage Factor (round off to two decimal places) is 17.3 , If standard load is 9 tonne then Value of A is ______

Calculate the design trafiic in million standard axle required for design of flexible pavement as per IRC method using following data

i. Annual daily commercial vehicle at last count ( JUNE 2016) = 355

ii. Rate of traffic growth= 6%

iii. Design life = 15 years

iv. Vehicle damage factor = 1.5

v. Load safety factor =1

vi. The road is proposed to be completed in June 2021

Assume it will be two lane road with traffic in both direction

A traffic survey conducted on a road yield an average daily traffic count of 6000 vehicle. The axle load distribution on the same road is given in the following table:

The design period of the road is 12 years, the yearly traffic growth rate is 6.3% and the load safety factor is 1.3. If the vehicle damage factor is calculated from above data, the design traffic (in million standard axle load MSA) is