Time Left - 12:00 mins
BARC Quiz - 2
Attempt now to get your rank among 298 students!
Question 1
The trigonometric Fourier series of the signal x(t) shown in figure will contain
Question 2
The state equation of an LTI system is
The state transition matrix is
Question 3
A feedback control system shown below is subjected to noise N(S).
The transfer function, of the system is
Question 4
Consider the RLC circuit shown in figure. For step input (Vi), the overshoot is equal to
Question 5
The closed loop transfer function of a control system is given as,
= . The steady state value of y(t) for the applied input will be –
= . The steady state value of y(t) for the applied input will be –
Question 6
The no-load speed of a 230 V separately excited dc motor is 1400 rpm. The armature resistance drop and the brush drop are neglected. The field current is kept constant at ratedvalue. The torque of the motor in Nm for an armature current of 8 A is ____________.
Question 7
An air-cored solenoid of 250 turns has a cross-sectional area A = 80 cm2 and length l = 100 cm. The value of its inductance is
Question 8
The self-capacitance of a coil is measured by the resonating capacitor. The measurement gives the value of tuning capacitor as C1 = 460 pF at a frequency.
f1 = 2 MHz. The second measurement at
f2 = 4 MHz yields a new value of tuning capacitor, C2 = 100 pf. The distributed capacitance Cd will be
f1 = 2 MHz. The second measurement at
f2 = 4 MHz yields a new value of tuning capacitor, C2 = 100 pf. The distributed capacitance Cd will be
Question 9
Consider the following circuit.
The maximum current output of or into the output of the driving gate G1 is
(For standard TTL, IIH = 40 μA and IIL = –1.6 mA)
Question 10
In a single- phase induction motor, a pulsating single-phase field is considered as a superposition of the two rotating fields in opposite directions. What is the slip of the rotor with respect to these fields?
- 298 attempts
- 0 upvotes
- 0 comments
Tags :
ESE & GATE EEGeneralMar 7ESE & GATE EE