Time Left - 20:00 mins
Merchant's Force Analysis Part - I GATE 2024 Fundamental Quiz
Attempt now to get your rank among 107 students!
Question 1
If material is cutting with zero rake angle then the thrust force is equal to __________.
Question 2
In oblique cutting, Cutting force is acting in______.
Question 3
A cast-iron work-piece was machined along its length on a Shaper machine, The dimensions of work-piece is length 150 mm, width 50 mm, and height 20 mm. If the cutting force required is 1000 N, determine the power consumed per stroke if the operation is carried at 50 strokes/min.
Question 4
Which pair of following statements is correct for orthogonal cutting using a single-point cutting tool?
P. Reduction in friction angle increases cutting force
Q. Reduction in friction angle decreases cutting force
R. Reduction in friction angle increases chip thickness
S. Reduction in friction angle decreases chip thickness
Question 5
Which force is mainly responsible for BUE formation
Question 6
The specific machining energy during the orthogonal turning of MS rod is 
. The depth of cut, feed, cutting velocity 
respectively. The main cutting force in N is:
. The depth of cut, feed, cutting velocity respectively. The main cutting force in N is:- 107 attempts
- 0 upvotes
- 0 comments
Jan 19ESE & GATE ME
