Time Left - 30:00 mins

JEE Revision Plan - Physics 12.2

Attempt now to get your rank among 608 students!

Question 1

An n-p-n transistor has three leads A, B and C. Connecting B and C by moist fingers, A to the positive lead of an ammeter, and C to the negative lead of the ammeter, one finds large deflection. Then, A, B and C refer respectively to :

Question 2

A Zener diode is connected to a battery and a load as shown below :
The currents and are respectively

Question 3

To get an output of 1 from the circuit shown in figure the input must be:

Question 4

The truth table given in fig. represents

Question 5

In the circuit below, A and B represent two inputs and C represents the output. The given circuit is 

Question 6

A transmitting antenna at the top of a tower has a height 32 m and the height of the receiving antenna is 50 m. What is the maximum distance between them for satisfactory communication in line of sight (LOS) mode?

Question 7

For sky wave propagation, the radio wave must have a frequency range in between:

Question 8

A signal is to be transmitted through a wave of wavelength λ, using a linear antenna. The length l of the antenna and effective power radiated Peff will be given respectively as:
(K is a constant of proportionality)

Question 9

A signal 10KHz with peak voltage 10v is used to modulate frequency 1 MHz and peak voltage 20 the modulating index is given by?

Question 10

Calculate the modulated index of an amplitude modulated wave have maximum and minimum amplitude at 10v and 3v respectively.

Question 11


Identify the correct sequence for A, B, C, D

Question 12

What will be the upper side band (USB) of a signal of 10 KHz with peak voltage 10v is used to modulate frequency of 1 MHz and peak voltage 20v ?

Question 13

In a radio, to tune a particular station we actually?

Question 14

In a resonant circuit the length of antenna is given by?

Question 15

A transducer _________.
  • 608 attempts
  • 9 upvotes
  • 14 comments

Tags :

Mar 4JEE & BITSAT