Time Left - 09:00 mins
ISRO ME Quiz-18
Attempt now to get your rank among 410 students!
Steady one-dimensional heat conduction takes place across the faces 1 and 3 of a composite slab consisting of slabs A and B in perfect contact as shown in the figure, where kA, kB denote the respective thermal conductivities. Using the data as given in the figure, the interface temperature T2 (in oC. is ____
A solid steel shaft transmits 50 KW of power at the frequency of (50/ π)Hz. The initial torque needed in the shaft is ______.
A shell of 100 mm diameter and 100 mm height with the corner radius of 0.4 mm is to be produced by cup drawing. The required blank diameter is
A double-pipe counter-flow heat exchanger transfers heat between two water streams. Tube side water at 19 liter/s is heated from 10 °C to 38 °C. Shell side water at 25 liter/s is entering at 46 °C. Assume constant properties of water; density is 1000 kg/m3 and specific heat is 4186 J/kg.K. The LMTD (in °C) is __________
A carbide tool (having n = 0.25) with a mild steel workpiece was found to give life of 1 hour 21 minutes while cutting at 60 m/min. The value of C in Taylor’s tool life equation VTn = C would be equal to :
For two springs having same stiffness (k) are in series, the equivalent stiffness would be __________.
If the fluid velocity for a potential flow is given by V(x,y) = u(x,y)i+ v(x,y)j with usual notations, then the slope of the potential line at (x. y) as
Find the differential equation whose solution represents the family .
- 410 attempts
- 1 upvote
- 2 comments
Jul 18ESE & GATE ME
Apoorbo RoyMember since Sep 2020