 Software
 Open Access
 Published:
Coral: an integrated suite of visualizations for comparing clusterings
BMC Bioinformatics volume 13, Article number: 276 (2012)
Abstract
Background
Clustering has become a standard analysis for many types of biological data (e.g interaction networks, gene expression, metagenomic abundance). In practice, it is possible to obtain a large number of contradictory clusterings by varying which clustering algorithm is used, which data attributes are considered, how algorithmic parameters are set, and which nearoptimal clusterings are chosen. It is a difficult task to sift though such a large collection of varied clusterings to determine which clustering features are affected by parameter settings or are artifacts of particular algorithms and which represent meaningful patterns. Knowing which items are often clustered together helps to improve our understanding of the underlying data and to increase our confidence about generated modules.
Results
We present Coral, an application for interactive exploration of large ensembles of clusterings. Coral makes alltoall clustering comparison easy, supports exploration of individual clusterings, allows tracking modules across clusterings, and supports identification of core and peripheral items in modules. We discuss how each visual component in Coral tackles a specific question related to clustering comparison and provide examples of their use. We also show how Coral could be used to visually and quantitatively compare clusterings with a ground truth clustering.
Conclusion
As a case study, we compare clusterings of a recently published protein interaction network of Arabidopsis thaliana. We use several popular algorithms to generate the network’s clusterings. We find that the clusterings vary significantly and that few proteins are consistently coclustered in all clusterings. This is evidence that several clusterings should typically be considered when evaluating modules of genes, proteins, or sequences, and Coral can be used to perform a comprehensive analysis of these clustering ensembles.
Background
Collections of protein interactions, gene expression vectors, metagenomic samples, and gene sequences containing thousands to hundredsofthousands of elements are now being analyzed routinely. Clustering is often used to condense such large datasets into an understandable form: it has been successfully used on proteinprotein interaction (PPI) networks to discover protein complexes and predict protein function, e.g.[1]; on gene expression data to find patterns in gene regulation and essential cell processes, e.g.[2]; and on metagenomic samples to identify new species, compare them to existing clades, evaluate the diversity of a population, and suggest interdependencies between them[3, 4]. In other words, clustering has become a ubiquitous part of analysis for large biological datasets.
There are many clustering algorithms available for numerical and network data, e.g.[5–12]. Each algorithm, and choice of its parameters, results in different clusterings. Sometimes, clustering algorithms must resolve ties when generating modules or may be randomized. Consequently, a single clustering algorithm may produce diverse partitions on the same data[13]. Clusterings may also change when the underlying data becomes increasingly noisy or displays variation under different conditions (such as varying gene expression levels). In addition, considering many optimal and nearoptimal partitions has been shown to improve the understanding of module dynamics and the strength of relationships between individual items[14–17]. Such clusterings may offer drastically different perspectives on the data, where assessing the commonalities and differences is of great interest.
There are several ways in which the problem of diverse clusterings has been addressed. Some tools rely on a single clustering only and focus on module quality assessment, e.g.[18, 19]. Comparing two or more clusterings at a time is usually done by computing a single metric, such as the Jaccard or Rand index[20], to compare clusterings sidebyside[21] or in a dendrogram[22]. These approaches can easily compare a pair of clusterings, but are not extendable to greater number of clusterings. Another approach is to aggregate multiple partitions into a consensus clustering[23, 24] without delving into the differences between individual clusterings and, thus, disregarding possibly important information about the clusterings. Finally, some approaches have made steps towards visual examination of multiple clusterings: King and Grimmer[25] compare clusterings pairwise and project the space of clusterings onto a plane to visualize a clustering landscape, and Langfelder et al.[26] investigate ways to compare individual modules across multiple conditions. However, none of these approaches offer a platform for a multilevel analysis of ensembles of diverse clusterings.
In the present study, we describe Coral—a tool that allows for interactive and comprehensive comparison of multiple clusterings at different levels of abstraction. Coral allows users to progressively move from an overview to analysis of relationships between individual data items. Users may start by examining statistics on the data and individual clusterings, or by assessing the overall homogeneity of a dataset. Users can then compare any two partitions in the ensemble in greater detail. Larger scale trends become pronounced when groups of items that cocluster often are automatically identified and highlighted. We also extend parallel sets plot[27] to show how individual items switch modules across clusterings. Coral’s visualizations are interactive and are coordinated so that users can track the same group of data items across multiple views.
Implementation
In Coral’s design, we followed the visualization mantra coined by Shneiderman[28]: overview, zoomandfilter, detailsondemand. At the overview level, Coral displays dataset statistics and highlights the most similar and dissimilar clusterings; at the midlevel, “zoomedin,” analysis explains similarities between clusterings through module comparison; the lowlevel analysis compares coclustering patterns at the level of individual data items: the genes, proteins, or sequences. The displays are coordinated[29] so selecting data in one of the views highlights the corresponding items in the other views (see Figure1).
Coral works with modules — groups of items closely related to one another according to some metric or property. For example, modules can constitute a collection of genes that get coexpressed together or proteins forming a complex. A clustering is a collection of modules and usually is an output of a clustering algorithm. Users may also choose to group data according to attributes that come with the data such as cellular component or molecular function GO terms and use that partition as a clustering. Users may combine data from different experiemnts and across species so long as the data items that the user treats as homologous have the same IDs across the dataset.
Coral takes as an input the module files where each file represents a single clustering, and each line in the file contains a list of data items (proteins, genes, or sequence ids) from a single module, e.g. as produced by MCL, the clustering algorithm by van Dongen[5]. Coral aggregates and visualizes these data through several connected displays, each of which can be used to answer specific questions about the clusterings. Below, we examine a few such questions and describe how Coral’s visualizations help to answer them.
How many and what size modules do clusterings have?
To gain a quick overview of their collection of clusterings, Coral users may start the analysis by reviewing basic statistics about their data: number of modules per clustering, average module size, number of items that were clustered, clustering entropy[30], and percentage of data items that ended up in the overlapping modules. Questions such as “Do clusterings have the same number of modules?” and “Are module sizes evenly distributed?” can be easily answered through these statistics. Each statistic is shown as a bar chart, and each clustering is associated with a unique color hue that is used consistently to identify the clustering throughout the system. If a clustering contains overlapping modules, the corresponding bar in the chart is striped as opposed to a solid bar for the clusterings containing no overlapping modules (see Figure1).
Which clusterings are the most and least similar?
Coral computes similarity scores between all clusterings and visualizes the lower triangle of the similarity matrix in a ladder widget (Figure2). The ladder compactly displays similarity scores for every pair of clusterings in the ensemble allowing for precise comparisons. Coral offers a choice of several similarity measures to compare partitions: Jaccard coefficient, Mirkin metric, Rand index, FolkesMallow metric, mutual information, variation of information, purity and inverse purity, and the Fmeasure[30]. The ladder is colorcoded as a heatmap with more intense blue cells corresponding to higher similarity scores and paler cells corresponding to low scores. Clicking a cell updates the contents of a moduletomodule comparison widget (see next subsection).
Which modules are the most similar between the two clusterings?
A natural followup to finding a highly similar pair of clusterings is to review the similarities between their individual modules. Is a group of interacting genes preserved between the two stages in the cell life cycle? Is there a match for a given protein complex in the PPI network of another species? Moduletomodule comparison answers these questions and explains the origins of clustering similarity at a “zoomedin” module level.
For a given pair K_{1},K_{2} of clusterings, Coral calculates the Jaccard similarity$J={m}_{i}^{1}\bigcap {m}_{j}^{2}/{m}_{i}^{1}\bigcup {m}_{j}^{2}$ between every module$\left(\right)close="">{m}_{i}^{1}\in {K}_{1}$ and$\left(\right)close="">{m}_{j}^{2}\in {K}_{2}$ thus capturing the amount of overlap between the two modules. For every such module pair, Coral displays the pair’s Jaccard score and items in the union, intersection, left and right set differences. All module pairs are organized in a sortable table (see Figure3). The slider above the table allows the user to filter out module pairs for which the Jaccard score is outside the slider’s range allowing users to focus on highly similar (or dissimilar) modules. Although moduletomodule analysis is possible with the parallel partitions plot (discussed below), the table offers a sortable and filterable view of the same data while supplying additional information (e.g. Jaccard index). The moduletomodule table shows only the module pairs with some overlap and easily scales to hundreds of modules, thereby offering a more compact and easily navigable alternative to a confusion matrix (e.g. as used in[26]).
Does this module appear in other clusterings?
The ability to track individual items and whole modules across multiple clusterings provides a high level of abstraction in clustering analysis: modules may split and merge as users switch from clustering to clustering. To afford an exploration at the module level, we have developed a parallel partitions plot — an extension of a parallel sets plot used in the analysis of categorical multivariate data[27]. The parallel partitions plot represents each clustering as a horizontal band. The blocks comprising each bands represent modules, with the width of a block proportional to the number of items in that module. Semitransparent parallelograms between clusterings connect data items with the same name. That is, each item in a clustering will be connected to its copy in the band immediately below it (see Figure4).
The parallel partitions plot allows users to track individual items and whole modules across all partitions. To see whether a module splits or merges in other clusterings, users can select a module with a mouse while holding a shift key to highlight its members in every clustering in the plot (see red traces in Figure4). Similarly, users may select individual items and trace them through every clustering band. The selections made in the parallel partitions plot propagate to other views making it easy to track the same group of items throughout the application. The plot is zoomable — users may zoom in to focus on a few items at a time or zoom out to see global trends across the ensemble. When the zoom level permits it, the plot displays the item labels.
The order of items in the clustering bands matches the order of items in the cocluster matrix (discussed below) as closely as possible, while at the same time attempting to minimize the amount of crossover between the parallelograms connecting items in the consecutive clusterings. However, the items in the bands must be placed inside their respective modules. We discuss an algorithm that finds a good ordering of items in the clustering bands in the Methods section.
What other items are in the same module as a given item u?
A single clustering assigns a data item v to a module defining its cohort — a set of items in the same module as v. Knowing the item’s module helps in assigning function to unknown proteins[6] and novel genes[2]; knowing that the item’s cohort is consistent across many clusterings increases the confidence of such predictions.
In Coral, pairwise cocluster memberships are aggregated in a cocluster matrix[24]. Given a single clustering K, n = K, we define an n × n matrix A^{K} to be K’s cocluster matrix where its entries$\left(\right)close="">{a}_{\mathit{\text{ij}}}^{K}$ are:
For some item pairs, coclustering may be an artifact of a tiebreaking policy or a choice of an algorithm parameter: such item pairs may only cocluster in few clusterings. On the other hand, we would like to know whether there were item pairs that coclustered across most partitions in the ensemble. These cohort dynamics stand out if we sum up the cocluster matrices to form a single matrix:
where A^{K}_{ t } is a cocluster matrix for a clustering K_{ t } and k is the number of clusterings. Here, the$\left(\right)close="">{a}_{\mathit{\text{ij}}}^{+}$ entries equal k (the number of clusterings) for item pairs (v_{ i },v_{ j }) that have coclustered in all partitions suggesting a strong relationship between the items, and the low$\left(\right)close="">{a}_{\mathit{\text{ij}}}^{+}$ values correspond to pairs that coclustered in only a few clusterings and are more likely to have been assigned to the same module by chance. The cells are colored according to their values and vary from white (low values) to red (high values). Users may zoom in and out on the matrix to focus on areas of interest.
The cocluster matrix is hard to read unless similar rows and columns are placed near each other. Reordering the rows and columns of A^{+} brings nonzero entries closer to the diagonal and exposes any modular structure. When clusterings are highly similar, the reordered matrix will consist of blocks along the diagonal with high$\left(\right)close="">{a}_{\mathit{\text{ij}}}^{+}$ values (Figure5). Clusterings that are very dissimilar produce reorderings similar to Figure6 — the diagonal blocks mostly contain low$\left(\right)close="">{a}_{\mathit{\text{ij}}}^{+}$ values (colored white or light pink) with many entries away from the diagonal.
Are there whole groups of items that cocluster together often?
Groups of items that end up in the same module across many clusterings are of a particular interest because they represent the robust subclusters in the data. Such commonly coclustered sets are called cores. Items in cores form the most trustworthy modules and indicate particularly strong ties between data items, increasing, for example, the confidence in protein complex identification[32] and gene annotation[33].
In a cocluster matrix, cores translate to contiguous blocks of highvalue entries. Coral finds the cores using a fast dynamic programming algorithm and highlights them within the cocluster matrix (inset, Figure6a). When users provide clusterings derived from a network, Coral can augment cores with an overlay showing each core’s cohesion — the ratio E_{in}/E_{out} where E_{in} is the number of edges within the core and E_{out} is the number of edges that have one endpoint inside the core and another endpoint outside of it[34]. When a core’s cohesion is low, the blue overlay is smaller indicating that the core shares many connections with the rest of the network (Figure6b). Cores for which cohesion is high are more isolated from the rest of the network — these cores are distinguishable by the blue overlays that almost cover the core.
Do items within a groundtruth clustering often cocluster in other clusterings?
When validating new protein complexes or coexpressed gene modules, users may want to see how well their results match groundtruth clusterings such as protein complexes from MIPS[35], or sets of coregulated genes from RegulonDB[36]. In Coral, users may designate a single clustering as a base — a set of trusted modules with which other clusterings are expected to agree. When in this mode, Coral will only highlight those cells in the cocluster matrix that are within the modules of the base and gray out all other nonzero matrix cells to bring users’ attention to the clustering in question. Figure7 shows an example of a cocluster matrix with the base set to be the A. thaliana modules reported in[31].
In which clusterings do particular items cocluster?
The cocluster matrix displays the total number of times any two items were coclustered, and the tooltips that appear after hovering over a matrix cell show a list of clusterings in which a given pair has been coclustered. To facilitate sorting and search for particular item pairs, Coral provides a companion table where each row represents a pair of data items and displays the number of times the items coclustered along with the pair’s signature. The signature is a klong vector where the t^{th}element is 1 when both data items, say, proteins, have been placed in the same module in clustering K_{ t }. If the pair’s items were not in the same module in K_{ t }, the t^{th}element is set to 0.
Visually, the signature’s elements that are 1 are drawn as tall solid columns and zeros are represented by the short stumps using the same color for each clustering as used in the overview statistics and in the parallel partitions plot. Figure8 shows an example of two such pairs that have different cocluster signatures suggesting that the relationship between the last two A. thaliana proteins is stronger than that of the first pair. Users can sort the rows by either the item name, the number of shared clusterings, or by the coclustering signature. Users can also filter by the signatures to display only the rows matching a user’s pattern.
Reordering the cocluster matrix
The order of rows and columns in the cocluster matrix is critical to extracting meaningful information from it. Finding an optimal matrix reordering is NPcomplete for almost any interesting objective. Algorithms for the optimal linear arrangement[37] and bandwidth minimization[38] problems have been used to reorder matrices with considerable success; however, both approaches perform poorly for matrices that have many offdiagonal elements. After comparing several reordering algorithms using the bandwidth and envelope metrics, we have chosen the SPIN[39] approach that consistently produced better results on a wide range of matrices.
This approach works as follows: given a matrix A^{+} , we solve a linear assignment problem (LAP) by mapping A^{+} ’s rows to their optimal positions in the matrix. In other words, given a bipartite graph G = (R,I,E) with R being the set of A’s rows, I a set of indices to which the rows will be assigned, and E all possible edges between nodes in R and I, we seek a matching between R and I with in a minimum cost. The edges connecting the row nodes to index nodes are weighted according to how well a row fits a particular index according to a metric that rewards rows that have nonzero entries close to diagonal and penalizes those rows that have weight away from diagonal:
where w(i,ℓ) is the weight of assigning i^{th} row to ℓ^{th} position, and the$\left(\right)close="">{a}_{\mathit{\text{ij}}}^{+}$ values are the cocluster matrix entries. After permuting A^{+} ’s rows, the columns of A^{+} must be permuted to match the row order, thus changing the weights w(i,ℓ) and making the row assignments found previously no longer optimal, so this process is repeated. In Coral, we use two different solvers for the LAP problem: a fast, greedy solver and the Hungarian algorithm. The greedy solver matches rows to indexes by iteratively selecting the best rowindex pair; it quickly finds a starter reordering that can later be improved by the Hungarian algorithm. The Hungarian algorithm solves the linear assignment problem optimally, but because a permutation of rows invalidates the ordering of the columns, the algorithm has to be rerun for several iterations to improve the reordering. We continue iterating LAP until we get no improvement in assignment cost, observe a previously considered permutation, or exceed the maximum number of iterations.
Identifying cores
Given a reordered cocluster matrix A, we want to find contiguous areas containing high cocluster values (cores). We rely on the notion of region density:
where a region is a square block on the matrix diagonal between rows p and q, and its density is the sum s(p q) of all matrix entries within the area divided by the area’s width q−p. Alternatively, we can think of the cocluster matrix A^{+} as a weighted adjacency matrix of some graph G(A^{+} ), then d(p q) is the density of a subgraph S induced by the vertices p,…,q: d(p q) = E(S)/V(S), where E(S) is the sum of edge weights in S and V(S) is a set vertices in S[33].
To find cores, we want to find areas on the diagonal such that the sum of their densities is highest. We do not allow the identified cores to overlap (thus we require disjoint subgraphs). We formulate the problem of finding maximally dense arrangement of areas as a dynamic program with the recurrence:
where D_{opt}(j) is the optimal area arrangement between 0^{th} and j^{th}item, and D_{opt} (n) gives the optimal partition of a matrix A^{+} into cores.
Assuming that densities d(p,q) are precomputed and require only a constant time to look up, the dynamic program above takes O(n^{2}) time (for each i, we solve at most n subproblems, and i ranges from 1 to n). However, a brute force algorithm for computing the block sums s(p,q) (and, hence, the densities) in equation 1 must iterate through every pair 1 ≤ p < n, p < q ≤ n, each time computing a sum of$\left(\genfrac{}{}{0ex}{}{qp+1}{2}\right)$ entries, resulting in a runtime of O(n^{4}). This can be improved because the sums are related. We have:
making it possible to compute all s(p,q) in O(n^{2}) time. This reduces the total runtime to find cores to O(n^{2} + n^{2}) = O(n^{2}).
The algorithm finds a series of areas of varying size and density. Some areas are of no interest and were included in the series only because every block contributes a nonzero score to the total sum. To focus on the meaningful regions only, we filter out the cores with density less than the average density. To calculate the average density for a region p,…,q, we first compute an average cell value for A^{+} :
where$\stackrel{\u0304}{z}$ is the number of nonzero cells in A^{+} . We then define a probability of an edge existing in a graph induced by A^{+} :
Then, for a given ordering of the matrix A^{+} , let S be a subgraph induced by vertices p,…,q. Then h_{ pq }= q−p + 1 is the number of vertices in S and$\left(\genfrac{}{}{0ex}{}{{h}_{\mathit{\text{pq}}}}{2}\right)$ is the maximum number of edges S can possibly have. For this block, the expected block density would be:
The areas that have density higher than their d_{avg}(p,q) represent groups of data items that have coclustered together more often than is expected by chance. Hence, Coral displays only these cores.
Ordering in parallel partitions
When ordering clustering bands in the parallel partitions plot, we would like to put similar clusterings next to each other and avoid putting two dissimilar clusterings vertically adjacent. The intuition for such a constraint is that if the two clusterings K_{ i }and K_{i+1}share many similarities, the bands connecting individual items between the clusterings will only cross a few times making it easier to track module changes. We also need to order items within the bands in a way that puts items from the same module next to each other and does not allow items from other modules to interleave.
To find a vertical order for the clustering bands, we apply a greedy algorithm that uses clustering similarity scores. First, we compute the similarity for every pair of clusterings sim(K_{ i },K_{ j }) using Jaccard. Next, we find the two most similar clusterings K_{1},K_{2}, add them to a list, and look for a clustering most similar to either K_{1} or K_{2} (whichever is greater). We proceed by repeatedly picking the clustering that is most similar to the last clustering added to the list. The order in which clusterings were added to the list determines the order of the clustering bands.
We pursue two objectives when ordering items and modules within a single clustering band: items that belong to the same module must be placed next to each other, and the ordering has to be similar to the column ordering in the cocluster matrix (so as to maintain the user’s mental mapping between the two visualizations). To preserve the matrix ordering in clustering bands, each module is best placed in a position where most of its items are close to the matrix columns corresponding to those items. However, the order of the columns in the matrix may be such that two items u and v from the same module are far apart in A^{+} . We propose a heuristic to solve this ordering problem: given an ordering of the columns in the matrix A^{+} , for each module m_{ i }in clustering$\left(\right)close="">K=\{{m}_{1},\dots ,{m}_{{k}_{i}}\}$ we compute its rank based on how “displaced” items in the module are relative to the positions of the module’s items in the matrix:
where i(u) is the index of a column in A^{+} corresponding to the data item u. Modules that should be placed first in the clustering band would have the lowest rank, so we sort the modules in order of increasing d, and the module’s position in the sorted array determines module’s position in the clustering band.
Results
Data
Arabidopsis thaliana is a model organism widely used in plant science, but out of its 35,000 predicted proteins one third still lack an assigned function[40]. A recent publication reports a new protein interaction network for A. thaliana that covers a part of the plant’s proteome not studied previously[31]. We have selected several clustering algorithms that are often used on PPI networks (Table1) and, for each of the algorithms, we have generated a clustering of the largest connected component of the A. thaliana’s network. To test the resulting modules for robustness, we compare this ensemble of clusterings to the modules reported by the authors of[31] who used a linkclustering method by Ahn, Bagrow, and Lehman[10]. Prior to comparison, we filtered the newly generated modules using the same criteria as[31] by removing modules of size smaller than 6 and with partition density < 0. The new modules were tested for GO enrichment with FuncAssoc[41] (see Table1 for details).
For our comparison, we have focused on the graph clustering algorithms for which the implementations were available (see Table1). Louvain[9] and Clauset[7] are two algorithms that search for a network partition with highest modularity[42]. Both tend to find large clusters and usually cover most of the nodes in a network. CFinder[8] is a clique percolation method that identifies overlapping communities by continuously rolling cliques of an increasing size. Resulting clusterings usually contain many small modules with a high amount of overlap and cover only a part of the network ignoring graph structures like bridges and stars. MCL[5] is a fast, flowbased clustering algorithm that uses random walks to separate highflow and lowflow parts of the graph. Its modules tend to be small and usually cover most of the input network. MCODE[6] algorithm finds modules in biological networks by expanding communities around vertices with high clustering coefficient. “Fluff” and “haircut” options for MCODE allow to add singleton nodes connected to the module by just one edge and to remove nodes weakly connected to the module correspondingly. MINE[12] is closely related to MCODE, but uses a modified weighting scheme for vertices which results in denser, possibly overlapping modules. SPICi[11] grows modules around vertices with high weighted degree by greedily adding vertices that increase module’s density. The partitions contain many dense modules, but usually cover only a part of the network.
Applying Coral to A. thaliana clusterings
To get an overview of the data, we review various statistics on the generated clusterings. For the majority of the clusterings, modules that remained after filtering covered only a portion of the network. The two clusterings produced by the modularitybased methods, Louvain and Clauset, were the only clusterings that included more than 95% of all proteins into their modules. The number of modules per clustering varied significantly from 20 to 666 (Table1). The average module size was highest for Clauset (115.65), Louvaine (103.00), and the MCODE.F (82.05) clusterings significantly exceeding the average module size among all other clusterings (3.0226.31 items per module). For the original 26 A. thaliana modules[31], 3% of the proteins were assigned to more than one module; in the CFinder clustering over half of the clustered proteins (59%) participated in multiple modules.
The nine A. thaliana clusterings are highly dissimilar: most cells in the ladder widget (Figure2) are white or pale blue, and the majority of pairwise Jaccard similarity scores are below 0.07. MCL yielded the partition most similar to A. thaliana modules reported in[31] (A.Thal original) with Jaccard similarity of 0.60. Surprisingly, the 26 modules generated by link clustering[31] shared very little similarity with CFinder, the only other algorithm in the ensemble designed to produce overlapping modules.
Low pairwise similarity scores between so many pairs of clusterings is easily explained using the moduletomodule table: clusterings with Jaccard similarity below 0.07 overlap by a few small modules or no modules at all. The similarity of 0.60 between MCL and A.Thal (Figure4) may be attributed to the two big modules that are largely replicated between the two clusterings: the module m9 from MCL and the module m0 from A. thaliana (highlighted row) overlap by 288 proteins with Jaccard similarity 0.8. Several smaller modules (shown at the top of the table) are duplicated exactly between the two clusterings.
The coclustering matrix for A. thaliana clusterings contains several large regions of coclustered proteins along the diagonal (Figure6), however, most cells are pale indicating that they were coclustered by only a few clustering algorithms; very few matrix cells are close to the saturated red. Indeed, 65.25% of all coclustered pairs of A. thaliana proteins have coclustered just once across all of the nine clusterings used in the analysis and only 6.34% of protein pairs were coclustered in 5 or more partitions. This low number of protein pairs that were assigned to the same cluster means that the clusterings in the ensemble mostly disagreed.
The dynamic program for identifying cores found 249 areas in the A. thaliana network in which proteins coclustered more often than could be expected by chance, with the largest core containing 215 proteins and with the average number of proteins per core of 10.38 proteins. Most cores, including the largest core, had low cohesion values indicating that the proteins forming the cores had many connections to proteins outside of the cores (see Figure6). This finding is correlated with the fact that the clusterings did not agree in general and only small sets of proteins were consistently clustered together across the ensemble.
Finally, setting A.thal original to be the base clustering shows that the modules found by[31] covered only a fraction of modules found by other methods, although they included the largest core. The majority of A.thal original modules were colored pale pink indicating that modules found by the link clustering were found by no more than 3 other clustering methods. We trace the largest core in the parallel partitions plot (Figure4): the proteins in the core are coclustered by A.thal original, Clauset, Louvaine, MCL, and MCODE.F while SPICi, MINE, and MCODE ignored the majority of core’s proteins completely. CFinder, with its many overlapping modules of size 3, 4, and 5, clusters some of the core’s proteins and puts a large part of the core in the grab bag group representing unclustered proteins.
Discussion
Clustering algorithms may generate wildly varying clusterings for the same data: algorithms optimize for different objectives, may use different tie breaking techniques, or only cluster part of the data items. A popular technique for optimizing modularity has been shown to suffer from a resolution limit[43] and multiple decompositions may have the same modularity value[14]. When a true decomposition is available, the clustering quality can be quantified using the similarity score and the true positive and true negative rates. However, when there is no true clustering, it is hard to decide which clustering is better than the others. We propose that researchers generate several clusterings by either using different clustering algorithms or varying algorithm parameters. Coral can help compare such clusterings and identify cores in which the data items cocluster across multiple clusterings.
Most views and statistics in Coral work for both nonoverlapping and overlapping clusterings. All overview statistics extrapolate well for overlapping modules except for entropy which assumes that no two modules overlap and therefore may overestimate the actual entropy. The cocluster matrix naturally adapts to overlapping modules by allowing their corresponding blocks to overlap. Currently, if a pair of data items cooccur in more than one module within a single clustering, their cocluster value is set to 1 and is not weighted higher relative to other pairs. The parallel partitions plot assumes that the modules in individual clusterings do not overlap. However, if there are overlapping modules, parallel partitions will still lay out the modules in a line by duplicating the cooccurring element in every module in which it occurs.
Although the examples we use in this paper are based on network clustering, Coral does not require its input data to be a network partition and can be used with equal success on gene expression or classification data. In particular, if users would like to compare several classification results, they can do so in the same manner as we have demonstrated for the A. thaliana clusterings. The similarity measures of purity, inverse purity, and the Fmeasure implemented in Coral are helpful in comparing classifications to the available truth. The moduletomodule table is a more flexible alternative to the confusion matrix that is often used to evaluate classification results.
Coral has been used to analyze clusterings of up to 4115 items. The runtime varies with the number of clusterings, number of modules and data items per clustering, and the size of the modules. The startup operations — parsing the input clusterings, computing dataset statistics and alltoall clustering similarities, as well as rendering the views — take from under a second to 11 seconds for clusterings from 33 to 4115 data items. Matrix reordering is the single biggest performance bottleneck for Coral. Reordering the cocluster matrix for 2376 A. thaliana proteins took, on average, 29 seconds when to reorder using the greedy heuristic and 70 seconds when to reorder using the Hungarian algorithm. However, both the greedy heuristic and the Hungarian algorithm find good orderings after very few iterations and the reordering only needs to be computed once before analysis. Solutions for LAP computed with the Hungarian algorithm improve with every iteration and usually converge on a good reordering fast.
Conclusions
Coral offers a comprehensive array of visualizations that allow users to investigate modules from various viewpoints inlcuding several novel views. Coral guides users from overview statistics implemented as familiar bar charts to detailed clustertocluster comparison in a table. The ladder widget, a lower triangle of the comparison matrix, helps users pick the most similar (or dissimilar) pair of clusterings and to judge how similar clusterings in the dataset are overall. A colorcoded cocluster matrix shows how often any pair of items in the dataset have been placed in a module together. A novel adaptation of parallel coordinates, parallel partitions plot, makes tracking a group of items across clusterings easy with intuitive selection techniques. These views combined create a powerful tool for a comprehensive exploration of an ensemble of clusterings. Coral can help users generate questions and hypotheses about the data that could be later definitively answered with the help of additional experiments.
Availability and requirements

Project name: Coral

Project home page: http://cbcb.umd.edu/kingsfordgroup/coral/

Operating systems: platformindependent

Programming language: Java

Other requirements: Java 1.6 and 1Gb of RAM

License: GNU GPL
References
 1.
Sharan R, Ulitsky I: Networkbased prediction of protein function. Mol Syst Biol 2007, 3: 88.
 2.
Ulitsky I, MaronKatz A, Shavit S, Sagir D, Linhart C, Elkon R, Tanay A, Sharan R, Shiloh Y, Shamir R: Expander: from expression microarrays to networks and functions. Nat Protoc 2010, 5(2):303–322. 10.1038/nprot.2009.230
 3.
Chatterji S, Yamazaki I, Bai Z, Eisen JA: CompostBin: A DNA compositionbased algorithm for binning environmental shotgun reads. Tech. rep., arXiv 2007 Tech. rep., arXiv 2007
 4.
White JR, Navlakha S, Nagarajan N, Ghodsi MR, Kingsford C, Pop M: Alignment and clustering of phylogenetic markers — implications for microbial diversity studies. BMC Bioinf 2010, 11: 152. 10.1186/1471210511152
 5.
van Dongen S: Graph clustering by flow simulation. PhD thesis. University of Utrecht, 2000 University of Utrecht, 2000
 6.
Bader G, Hogue C: An automated method for finding molecular complexes in large protein interaction networks. BMC Bioinf 2003, 4: 2. 10.1186/1471210542
 7.
Clauset A, Newman MEJ, Moore C: Finding community structure in very large networks. Physical Rev E 2004, 70(066111):6.
 8.
Adamcsek B, Palla G, Farkas IJ, Derényi I, Vicsek T: CFinder: locating cliques and overlapping modules in biological networks. Bioinformatics 2006, 22(8):1021–1023. 10.1093/bioinformatics/btl039
 9.
Blondel VD, Guillaume JL, Lambiotte R, Lefebre E: Fast unfolding of communities in large networks. J Stat Mech: Theory and Experiment 2008, 2008(10):P10008. 10.1088/17425468/2008/10/P10008
 10.
Ahn YY, Bagrow JP, Lehmann S: Link communities reveal multiscale complexity in networks. Nat Lett 2010, 466(5):761–765.
 11.
Jiang P, Singh M: SPICi: a fast clustering algorithm for large biological networks. Bioinformatics 2010, 26(8):1105–1111. 10.1093/bioinformatics/btq078
 12.
Rhrissorrakrai K, Gunsalus KC: MINE: module identification in networks. BMC Bioinformatics 2011, 12(192):1–10.
 13.
Navlakha S, Kingsford C: Exploring biological network dynamics with ensembles of graph partitions. In Proceedings of the 15th Pacific Symposium on Biocomputing (PSB). Hawaii; 2010:166–177.
 14.
Duggal G, Navlakha S, Girvan M, Kingsford C: Uncovering many views of biological networks using ensembles of nearoptimal partitions. In Proceedings of the 1st International Workshop on Discovering, Summarizing and Using Multiple Clusterings (KDD MultiClust). Washington, DC; 2010:9–9.
 15.
Lewis AC, Jones NS, Porter MA, Charlotte DM: The function of communities in protein interaction networks at multiple scales. BMC Syst Biol 2010, 4: 100. 10.1186/175205094100
 16.
Langfelder P, Zhang B, Horvath S: Defining clusters from a hierarchical cluster tree: the Dynamic Tree Cut package for R. Bioinformatics 2008, 24(5):719–720. 10.1093/bioinformatics/btm563
 17.
Hopcroft J, Khan O, Kulis B, Selman B: Tracking evolving communities in large linked networks. Proc Nat Acad Sci USA 2004, 101(Suppl 1):5249–5253.
 18.
Yu Z, Wong HS, Wang H: Graphbased consensus clustering for class discovery from gene expression data. Bioinformatics 2007, 23(21):2888–2896. 10.1093/bioinformatics/btm463
 19.
Hibbs MA, Dirksen NC, Li K, Troyanskaya OG: Visualization methods for statistical analysis of microarray clusters. BMC Bioinf 2005, 6: 115. 10.1186/147121056115
 20.
Thalamuthu A, Mukhopadhyay I, Zheng X, Tseng GC: Evaluation and comparison of gene clustering methods in microarray analysis. Bioinformatics 2006, 22(19):2405–2412. 10.1093/bioinformatics/btl406
 21.
Seo J, GordishDressman H: Exploratory data analysis with categorical variables: an improved rankbyfeature framework and a case study. Int J HumanComput Interact 2007, 23(3):287–314. 10.1080/10447310701702519
 22.
Laderas T, McWeeney S: Consensus framework for exploring microarray data using multiple clustering Methods. OMICS: J Integr Biol 2007, 11: 116–128. 10.1089/omi.2006.0008
 23.
Strehl A, Ghosh J: Cluster ensembles — A knowledge reuse framework for combining multiple partitions. J Machine Learning Res 2002, 3: 583–617.
 24.
Monti S, Tamayo P, Mesirov J, Golub T: Consensus clustering: a resamplingbased method for class discovery and visualization of gene expression microarray data. Machine Learning 2003, 52: 91–118. 10.1023/A:1023949509487
 25.
Grimmer J, King G: General purpose computerassisted clustering and conceptualization. Proc Nat Acad Sci USA 2011, 108(7):2643–2650. 10.1073/pnas.1018067108
 26.
Langfelder P, Luo R, Oldham MC, Horvath S: Is my network module preserved and reproducible? PLoS Comput Biol 2011, 7: e1001057. 10.1371/journal.pcbi.1001057
 27.
Kosara R, Bendix F, Hauser H: Parallel sets: interactive exploration and visual analysis of categorical data. IEEE Trans Visualization Comput Graphics 2006, 12(4):558–568.
 28.
Shneiderman B: The eyes have it: a task by data type taxonomy for information visualizations. In Proceedings 1996 IEEE Symposium on Visual Languages. Boulder, CO: IEEE Comput Soc Press; 1996:336–343.
 29.
North C, Shneiderman B: Snaptogether visualization: a user interface for coordinating visualizations via relational schemata. In Proceedings of the Working Conference on Advanced Visual Interfaces  AVI ’00. New York: ACM Press; 2000:128–135.
 30.
Meilă M: Comparing clusterings by the variation of information. In Proceedings of the 16th Conference on, Learning Theory and Kernel Machines: 7th Kernel Workshop. Edited by: Schölkopf B, Warmuth MK. Berlin: SpringerVerlag; 2003:173–187. Lecture, Notes in Computer Science, vol. 2777 Lecture, Notes in Computer Science, vol. 2777
 31.
Arabidopsis Interactome Mapping Consortium: Evidence for Network Evolution in an Arabidopsis Interactome Map. Science 2011, 333(6042):601–607.
 32.
Luo F, Li B, Wan XF, Scheuermann RH: Core and periphery structures in protein interaction networks. BMC Bioinf 2009, 10(Suppl 4):S8. 10.1186/1471210510S4S8
 33.
Saha B, Hoch A, Khuller S, Raschid L, Zhang X: Dense subgraphs with restrictions and applications to gene annotation graphs. In Proceedings of the 14th Annual international conference on Research in Computational Molecular Biology (RECOMB’10). Edited by: Berger B. Berlin: SpringerVerlag; 2010:456–472. Lecture Notes in Computer Science, vol. 6044 Lecture Notes in Computer Science, vol. 6044
 34.
Bailey TA, Dubes RC: Cluster validity profiles. Pattern Recognit 1982, 15(2):61–83. 10.1016/00313203(82)900024
 35.
Mewes HW, Ruepp A, Theis F, Rattei T, Walter M, Frishman D, Suhre K, Spannagl M, Mayer KFX, Stümpflen V, Antonov A: MIPS: curated databases and comprehensive secondary data resources in 2010. Nucleic Acids Res 2011, 39(Database issue):D220—D224.
 36.
GamaCastro S, Salgado H, PeraltaGil M, SantosZavaleta A, Muñiz Rascado L, SolanoLira H, JimenezJacinto V, Weiss V, GarcíaSotelo JS, LópezFuentes A, PorrónSotelo L, AlquiciraHernández S, MedinaRivera A, MartínezFlores I, AlquiciraHernández K, MartínezAdame R, BonavidesMartínez C, MirandaRíos J, Huerta AM, MendozaVargas A, ColladoTorres L, Taboada B, VegaAlvarado L, Olvera M, Olvera L, Grande R, Morett E, ColladoVides J: RegulonDB version 7.0: transcriptional regulation of Escherichia coli K12 integrated within genetic sensory response units (Gensor Units). Nucleic Acids Res 2011, 39(Database issue):D98—D105.
 37.
Mueller C, Martin B, Lumsdaine A: A comparison of vertex ordering algorithms for large graph visualization. In Proceedings of the 6th International AsiaPacicifc Symposium on Visualization (APVIS’07). Edited by: Hong SH, Ma KL. Piscataway: IEEE; 2007:141–148.
 38.
Lai Y, Williams K: A survey of solved problems and applications on bandwidth, edgesum, and profile of graphs. J Graph Theory 1999, 31(2):75–94. 10.1002/(SICI)10970118(199906)31:2<75::AIDJGT1>3.0.CO;2S
 39.
Tsafrir D, Tsafrir I, EinDor L, Zuk O, Notterman DA, Domany E: Sorting points into neighborhoods (SPIN): data analysis and visualization by ordering distance matrices. Bioinformatics 2005, 21(10):2301–2308. 10.1093/bioinformatics/bti329
 40.
Kerrien S, Aranda B, Breuza L, Bridge A, BroackesCarter F, Chen C, Duesbury M, Dumousseau M, Feuermann M, Hinz U, Jandrasits C, Jimenez RC, Khadake J, Mahadevan U, Masson P, Pedruzzi I, Pfeiffenberger E, Porras P, Raghunath A, Roechert B, Orchard S, Hermjakob H: The IntAct molecular interaction database in 2012. Nucleic Acids Res 2011, 40(D1):D841—D846.
 41.
Berriz GF, Beaver JE, Cenik C, Tasan M, Roth FP: Next generation software for functional trend analysis. Bioinformatics 2009, 25(22):3043–3044. 10.1093/bioinformatics/btp498
 42.
Newman MEJ: Modularity and community structure in networks. Proc Nat Acad Sci USA 2006, 103(23):8577–8582. 10.1073/pnas.0601602103
 43.
Fortunato S, Barthelemy M: Resolution limit in community detection. Proc Nat Acad Sci USA 2007, 104: 36–411. 10.1073/pnas.0605965104
Acknowledgements
This work was partially supported by NSF grants EF0849899, IIS0812111, and CCF1053918 and NIH grant 1R21AI085376 to C.K. The authors thank Megan Riordan for helpful programming contributions, and Geet Duggal and Rob Patro for their helpful insights on matrix reordering.
Author information
Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
CK and DF conceived the project, DF is the designer and developer for the application. CK provided design considerations and worked on developing some of the algorithms. AG implemented reordering algorithms for cocluster matrix. DF and CK contributed to final manuscript. All authors read and approved the final manuscript.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Filippova, D., Gadani, A. & Kingsford, C. Coral: an integrated suite of visualizations for comparing clusterings. BMC Bioinformatics 13, 276 (2012). https://doi.org/10.1186/1471210513276
Received:
Accepted:
Published:
Keywords
 Cluster Algorithm
 Data Item
 Jaccard Similarity
 Module Pair
 Item Pair