GATE 2023 Mechanical Paper Live Analysis
Catch all famous GATE Mechanical faculties of BYJU'S EXAM PREP with live analysis of the GATE ME paper on our Youtube channel.
Join LIVE Session for GATE 2023 Mechanical Paper Analysis
Important Highlights of GATE 2023 Mechanical Paper Analysis
The GATE 2023 Mechanical paper analysis session was conducted after the afternoon (2 PM - 5 PM). Candidates had to carry their admit Cards to enter the examination hall. There were 8 MSQs (multiple select), 32 MCQs (multiple select questions), and 25 NAT (Numerical Answer Type) questions in the first shift of the GATE Mechanical 2023 exam. Other highlights are shared below.
- The overall difficulty level of the first shift of the GATE Mechanical paper was Moderate to Tough.
- There were 8 MSQs (Multiple select)questions in the GATE 2023 ME exam. All these questions were theoretical-type questions.
- Manufacturing Engineering and Materials had the highest weightage in GATE 2023 ME paper.
- Questions asked from the General Aptitude portion were Easy in the exam.
- The level of questions from Engineering Mathematics was Moderate, with 13 marks on the paper.
- Strength of Materials carried 12 marks on the paper.
GATE 2023 Mechanical Paper Analysis: Weightage Difficulty Level
Here are the subject-wise marks and question distribution based on the reviews from BYJU'S EXAM PREP users. Aspirants can check the detailed subject-wise analysis from the table given below.
Subjects | Questions | Total Marks | |
1 Mark | 2 Marks | ||
Fluid Mechanics & Machinery | 1 | 4 | 9 |
1 | 3 | 7 | |
Refrigeration & Air Conditioning | 0 | 0 | 0 |
Power Plant | 1 | 0 | 1 |
IC Engine | 0 | 0 | 0 |
Heat Transfer | 3 | 1 | 5 |
1 | 2 | 5 | |
2 | 1 | 4 | |
Strength of Materials | 4 | 4 | 12 |
Machine Design | 2 | 1 | 4 |
Manufacturing & Engineering Materials | 3 | 10 | 23 |
Industrial Engineering | 2 | 0 | 2 |
5 | 4 | 13 | |
5 | 5 | 15 |
Subject-wise Weightage Pie Chart
GATE 2023 Mechanical Paper Analysis: 3 Years' Data Comparison
GATE candidates always compare the present paper with the previous year's papers to match the difficulty level and questions. We have prepared a subject-wise comparison with the previous year's paper data to simplify. This GATE 2023 Mechanical paper analysis will help to compare data from the table below.
S.No. | Subjects | 2023 | 2022 | 2021 | 2020 | ||
Set 1 | Set 2 | Set 1 | Set 2 | ||||
1 | Fluid Mechanics & Machinery | 9 | 4 | 6 | 9 | 8 | 8 |
2 | Thermodynamics | 7 | 4 | 6 | 4 | 4 | 6 |
3 | Refrigeration & Air Conditioning | 0 | 0 | 3 | 3 | 0 | 3 |
4 | Power Plant | 1 | 3 | 2 | 3 | 5 | 2 |
5 | IC Engine | 0 | 2 | 1 | 0 | 2 | 3 |
6 | Heat Transfer | 5 | 10 | 6 | 5 | 3 | 5 |
7 | Engineering Mechanics | 5 | 8 | 2 | 5 | 5 | 5 |
8 | Theory of Machines & Vibrations | 4 | 7 | 7 | 10 | 8 | 6 |
9 | Strength of Materials | 12 | 6 | 7 | 7 | 7 | 6 |
10 | Machine Design | 4 | 5 | 7 | 2 | 5 | 5 |
11 | Manufacturing & Engineering Materials | 23 | 15 | 18 | 17 | 18 | 17 |
12 | Industrial Engineering | 2 | 8 | 7 | 7 | 5 | 6 |
13 | Engineering Mathematics | 13 | 15 | 13 | 13 | 15 | 13 |
14 | General Aptitude | 15 | 15 | 15 | 15 | 15 | 15 |
Total | 100 | 100 | 100 | 100 | 100 | 100 |
GATE 2023 Mechanical Paper Questions and Solutions
We are sharing the questions asked in the GATE 2023 Mechanical exam, which will also be helpful for candidates attempting the GATE exam in the coming years. These questions are provided by our students in GATE 2023 Mechanical paper analysis.
Manufacturing and Engineering Materials - Memory Based
Question - In a metal casting process to manufacture parts, both patterns & mould provide shape by dictating where the material should or should not go. Which of the option given correctly describe mould and pattern?
[MSQ]
- Pattern walls indicate boundaries within which the molten part material is allowed, while mould walls indicate boundaries where mould material is not allowed.
A mould wall indicates boundaries within which the molten part material is allowed, while a patterned wall indicates boundaries where mould material is not allowed.
Mould can be used to make the pattern
- Patterns can be used to make a mould
Question - Two surfaces, P & Q, are joined together. Which of a given operation, there is no melting of two surfaces P & Q for creating a joint?
- Brazing
- Adhesive Holding
- Spot Welding
- Arc Welding
2. Thermodynamics
Question - A HE extracts (QH) from a TR at T = 1000 k and rejects to (QL) to TR at T = 100k. At the same time, producing (W) work. At the same time, a combination of [QH, QL and W] is allowed.
[MCQ - 1 Mark]
- QH = 2000 J, QL = 750 J, W = 1250 J
- QH = 6000 J, Q2 = 600J, W = 5500 J
- QH = 2000 J, QL = 500J, W = 1000J
- QH = 6000 J, QL = 500J, W = 5500 J
Question - Consider isentropic flow (r = 1.4) through the duct. Variation along the flow is negligible. P1 = 100 kPa, P1 = 1.2 kg/m3, u1 = 400 m/s, A2 = 2A1. Correct statement about u2 and P2.
[MCQ - 1 Mark]
Question -
3. Strength of Materials
Question-
Theory of Machines - Memory-based
Question -
Question -
Engineering Mathematics - Memory based
Question - The initial value problem is solved numerically using the forward Euler's method with a constant and positive time step of Δt. Let yn represent the numerical solution obtained after the n steps. The condition |yn+1| < |yn| is satisfied if Δt does not exceed ____ integer).
[NAT]
Industrial Engineering - Memory-based
Question -
7. General Aptitude -Memory-based
Question - Planting::Seed:: Raising:
[MCQ - 1 Mark]
- Child
- Lift
- Temperature
- Height
Question - The minute hand and second hand of a clock cross each other.............times between 09:15:00 AM and 09:45:00 AM on a day
[MCQ - 1 Mark]
- 29
- 30
- 15
- 31
Power Plant - Memory-based
Question
Fluid Mechanics & Hydraulics
Question - Consider the incompressible laminar fluid flow of constant property Newtonian fluid in an isothermal circular tube. The flow is steady with fully developed temperature and velocity profiles. The Nusselt number for this flow depends on
- the Prandtl number but not the Reynold number
- the Reynold number but not the Prandtl number
- neither the Reynold number nor the Prandtl number
- both the Reynold number and Prandtl number
Question - Consider a unidirectional flow with a velocity field given by V(x, y, z, t) = u(x, t)i where u(0, t) = 1. If spatially homogeneous density varies with time as f(t) = 1 + 0.2e–t. The value of u(2, 1) = __________ (Round off to two decimal places). Assuming all dimensionless quantities.
[MCQ - 1 Mark]
Question - The figure shows two fluids held by a hinged gate. The atmospheric pressure is 100 kPa. The moment per unit width about the base of the hinge is ______ km/m. (Round off to decimal places). Assume acceleration due to gravity, g = 9.8 m/s2.
[MCQ - 1 Mark]
Engineering Mechanics
Question - The figure shows a wheel rolling without slipping on a horizontal plane with angular velocity w. A rigid bar PQ is pinned to the wheel at P while Q slides on the floor at the end. What is the angular velocity w2 of the bar PQ?
[MCQ - 1 Mark]
- w2 = 2w1
- w2 = 0.25 w1
- w2 = w1
- w2 = 0.5 w1
GATE 2023 Mechanical Question Paper Answer Key
Candidates can download the GATE 2023 Mechanical engineering questions and solutions PDF prepared by our experts, which will be shared soon after the exam is conducted for both shifts.
GATE ME 2022 Questions Solutions (Answer Key) for Mechanical Engineering
GATE ME 2023 Questions Solutions (Answer Key) for Mechanical Engineering (Memory Based)
GATE 2023 Mechanical Paper Analysis: Good Attempts
Candidates can check the number of good attempts for the afternoon shift per the GATE 2023 Mechanical paper analysis. This will boost the confidence of GATE ME aspirants until IIT Kanpur publishes the official GATE 2023 response sheet. The good attempts for this paper, considering the hardness is around 85+ Marks
Difficulty Level of GATE ME 2023 Exam
The Difficulty level of the Mechanical exam was Moderate to tough. The paper was harder this year compared to the previous year's paper. This difficulty level is updated per GATE 2023 paper analysis conducted by BYJU'S Exam Prep.
GATE Mechanical Expected Cut Off 2023 as Per Analysis
The expected cut-off for GATE ME 2023 will be around 25 to 26 marks for the general category.
GATE ME Previous Year Cut Off
Candidates can check the GATE previous year cut-off marks for the Mechanical Engineering paper of the GATE 2022, 2021, 2020, and 2019 exams.
Year | Branch | GEN | OBC/EWS | SC/ST/PwD |
GATE 2023 (Expected) | Mechanical Engineering | 25 to 26 | 23 | 18 |
GATE 2022 | Mechanical Engineering | 28.1 | 25.2 | 18.7 |
GATE 2021 | Mechanical Engineering | 33 | 29.7 | 22 |
GATE 2020 | Mechanical Engineering | 34 | 30.6 | 22.6 |
GATE 2019 | Mechanical Engineering | 34.1 | 30.7 | 22.7 |
Other Important Articles and Links for GATE 2023 Preparation
- How to use Virtual Calculator for GATE 2023
- Topper's strategy for GATE Exam Preparation
- GATE 2023 Exam Syllabus
- Follow Quora profile - Dheeraj Sir Faculty GATE Mechanical at BYJU'S Exam Prep
GATE 2023 Preparations with BYJU's Exam Prep Online Classroom Program
Important Links
Thank you
The Most Comprehensive Exam Prep App
BYJU'S Exam Prep
Comments
write a comment