Time Left - 15:00 mins
GATE 2023 || Strength of Materials || Quiz 14
Attempt now to get your rank among 67 students!
Question 1
Three beams of same material have the same length, same allowable bending stress and are subjected to the same maximum bending moment. The cross-sections of the beams are a circle, square and a rectangle with depth thrice the width. The ratios of their weights are
Question 2
In a simply supported beam, the maximum value of bending stress is 400MPa. If the beam undergoes only pure bending where the maximum value of bending moment is 20KN-m, find out its diameter.
Question 3
Which of the following is true about the bending stress?
Question 4
If the section modulus of the beam decreases, then bending stress will
Question 5
A thin strip of copper (E = 120 GPa) having length L and thickness, t = 1 mm is bent into a circle and held with the ends just touching. The maximum bending stress in the strip is limited to 250 MPa. The length of the strip is
Question 6
At a cross section of a beam,the maximum compressive stress at top is 800 kg/cm2 and the maximum tensile stress at bottom is 200 kg/cm2.The depth of cross section is 10 cm.The depth of neutral axis from the top of the section is x.Then x is equal to _______.
- 67 attempts
- 0 upvotes
- 1 comment
May 5ESE & GATE ME