Time Left - 15:00 mins

GATE 2023 Power electronics Rank Booster Quiz 43

Attempt now to get your rank among 36 students!

Question 1

In current commutated chopper the auxiliary thyristor stops conducting due to

Question 2

For same commutation circuit parameter & similar voltage supply. Peak current through main thyristor in voltage commutation and current commutation circuit respectively follows the relation.

Question 3

For 60A constant load current in a Current commuted chopper having input supply of 220 V with commutation circuit parameter of 10μH & 30μF. The minimum current rating of auxiliary thyristor required in order to have stable operation is____Amp

Question 4

A voltage commutated chopper is supplied from 200V for a constant load current of 160 Amp with commutation circuit parameter 40μH & 50μF. The voltage across capacitor at 120μsec after auxiliary thyristor triggered____ V.

Question 5

For the load requirement of constant Current of 25 Amp, a voltage commutated chopper is designed with commutation circuit specification of 50μF, 20μH & Ton time of 600μsec which is supplied by input voltage of 230V DC. The effective ON period of the circuit is ____sec.
(Answer upto 4 decimal places)

Question 6

A current commutated chopper is fed from a source VS. It’s commutating components are L & C. If the load current I0 is assumed constant during the process, then the time difference between auxiliary thyristor turn-off time & main thyristor turn off time.

Question 7

In a current commutated chopper, peak commutating current is 2.5 times the maximum possible load current. The source voltage is 220 V dc and main SCR turn off time is 35 msec. If maximum load current is 180 A, then the peak capacitor voltage is ___________ V.
  • 36 attempts
  • 0 upvotes
  • 0 comments
Jan 25ESE & GATE EE