Time Left - 25:00 mins
GATE 2022 Rapid Revision Weekly Quiz 8
Attempt now to get your rank among 353 students!
Question 1
The slenderness ratio for long columns is:
Question 2
The COP of a refrigerator working on a reversed Carnot cycle is 5. The ratio of the highest absolute temperature to the lowest absolute temperature would be
Question 3
The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because _______.
Question 4
During solidification of a pure molten metal, the grains in the casting near the mould wall are _______.
Question 5
The ratio of torque carrying capacity of solid shaft to that of hollow shaft of same material and of outer diameter equal to diameter of solid shaft is:
Where,
Di = inner diameter of hollow shaft
Do = outer diameter of hollow shaft
and τmax = Permissible shear stress for shaft material
Question 6
In which type of welding, a pool of molten metal is used?
Question 7
Match the following:
Question 8
A two-cylinder two-stroke have bore and stroke 300 mm and 500 mm respectively, Find the mean piston speed in meter per second at 300 rpm ______.
Question 9
Anti-friction bearings are ______.
Question 10
The value of principle stress (σ1) in terms of principle strain E1 and E2 is given by:
Question 11
Moment of Inertia of a triangular section of base a and height h about an axis passing through its centre of gravity and parallel to base is
Question 12
Water at ambient temperature flows through the horizontal pipe of uniform of cross-section. It the pressure drop across the pipe increase. The power required to pump the water across the pipe will be
- 353 attempts
- 0 upvotes
- 5 comments
Tags :
ESE & GATE MEGeneralJul 15ESE & GATE ME