Time Left - 15:00 mins
GATE 2022 : Power Electronics Quiz 3
Attempt now to get your rank among 231 students!
Question 1
For same commutation circuit parameter & similar voltage supply. Peak current through main thyristor in voltage commutation and current commutation circuit respectively follows the relation.
Question 2
For 60A constant load current in a Current commuted chopper having input supply of 220 V with commutation circuit parameter of 10μH & 30μF. The minimum current rating of auxiliary thyristor required in order to have stable operation is____Amp
Question 3
A voltage commutated chopper is supplied from 200V for a constant load current of 160 Amp with commutation circuit parameter 40μH & 50μF. The voltage across capacitor at 120μsec after auxiliary thyristor triggered____ V.
Question 4
For the load requirement of constant Current of 25 Amp, a voltage commutated chopper is designed with commutation circuit specification of 50μF, 20μH & Ton time of 600μsec which is supplied by input voltage of 230V DC. The effective ON period of the circuit is ____sec.
(Answer upto 4 decimal places)
(Answer upto 4 decimal places)
Question 5
The circuit in the figure is a current commutated dc-dc chopper where, ThM is the main SCR and ThAUX is the auxiliary SCR. The load current is constant at 120 A . ThM is turned on at t = 0 .
The peak values of current through capacitor and through main thyristor ThM will respectively be
Question 6
A current commutated chopper is fed from a source VS. It’s commutating components are L & C. If the load current I0 is assumed constant during the process, then the time difference between auxiliary thyristor turn-off time & main thyristor turn off time.
- 231 attempts
- 0 upvotes
- 0 comments
Oct 28ESE & GATE EE