Time Left - 15:00 mins

GATE 2020: Strength of Material Quiz 2

Attempt now to get your rank among 1873 students!

Question 1

The stress is proportional to strain upto the proportional limit, which is the law indicating that?

Question 2

If the radius of wire stretched by a load doubled, then its Young’s modulus will

Question 3

A metal rod of initial length Lo is subjected to a drawing process. The length of the rod at any instant is given by the expression, L(t)= Lo (1+t2) , where t is the time in minutes. The true strain rate (in min-1) at the end of one minute is ________.

Question 4

If a tensile test is done on brass item which is 20 mm in diameter having gage length of 100 mm and a tensile load T of 100 kN is applied, the gage marks distance increases by 2.345 mm. What will be the Poisson’s ratio when diameter of brass item decreases by 0.11 mm?

Question 5

The state of stress at a point ‘P’ in a two dimensional loading is such that the Mohr’s circle is a point located at 175 MPa on the positive normal stress axis.
Determine the maximum and minimum principal stresses respectively from the Mohr’s circle

Question 6

The state of stress at a point in a body is given by Description: F:\GradeStack Courses\GATE Tests (Sent by Ravi)\GATE-22-April\GATE-IES-ME-Strength-of-Materials_files\image118.png=100 MPa and Description: F:\GradeStack Courses\GATE Tests (Sent by Ravi)\GATE-22-April\GATE-IES-ME-Strength-of-Materials_files\image198.png=200 MPa. One of the principal stresses σ₁=250 MPa .The magnitudes of the other principal stress and the shearing stress Description: F:\GradeStack Courses\GATE Tests (Sent by Ravi)\GATE-22-April\GATE-IES-ME-Strength-of-Materials_files\image108.png are respectively
  • 1873 attempts
  • 7 upvotes
  • 35 comments
Aug 14ESE & GATE ME

Posted by:

Ankit SrivastavaAnkit SrivastavaMember since Apr 2019
GATE 2019 AIR - 346 Mtech from IIT Delhi
Share this quiz   |