Time Left - 15:00 mins
GATE 2019: Thermodynamics Rapid Quiz-3 (App update required to attempt this test)
Attempt now to get your rank among 550 students!
Question 1
A vehicle powered by a spark ignition engine follows air standard Otto cycle The engine generates 70 kW while consuming 10.3 kg/hr of fuel. The calorific value of fuel is 44,000 kJ/kg. The compression ratio is __________ (correct to two decimal places).
Question 2
8 Kg of water in a constant pressure container is agitated by a paddle unit, the temperature rises from 50oC to 90oC. The change in entropy ( in KJ/K) of water is
Question 3
SI engines are governed by
Question 4
The specific power output of a gas turbine is 336.5 kW/Kg and the exhaust gases leave the turbine at 700 K. If the value of CP and CV are 1 kJ/kg-K and 0.717 kJ/kg-K respectively, the turbine pressure ratio is
Question 5
A heat engine operates between three thermal reservoirs. It absorbs 258 kJ of energy as heat from a reservoir at 520C and rejects 100 kJ and 88 kJ of energy as heat to reservoirs at 270C and 20C repectively.It delivers 70 kJ of work.This heat engine _______.
Question 6
Consider two identical blocks of copper, each having a mass of 200 kg and specific heat of 0.3831 kJ/kg-k.One block is available at 600 K and other at 1200 K.Two blocks are brought into thermal contact with each other and allowed to reach a state of thermal equilibrium.Loss of available energy if the ambient temperature is 270C___________________kJ.
Question 7
One kg of air is available at 500 kPa and 300 K.The air is allowed to expand to a pressure of 100 kPa while in contact with the surroundings at 300 k. The final temperature of air is 300 K.Maximum amount of work that can be obtained is ________________kJ.
Question 8
For an engine operating on air standard Otto cycle, the clearance volume is 10% of the swept volume. The specific heat ratio of air is 1.4. the air standard cycle efficiency is
Question 9
In a heat engine, the ideal gas carries maximum temperature at point ................
Question 10
A Carnot steam cycle operates between a source at temperature of 311.6 °C, pressure 10 MPa and sink temperature of 32.88 °C and pressure 5 kPa. Related table is given below
Work ratio of the carnot cycle will be
Work ratio of the carnot cycle will be
Question 11
Air enters an adiabatic nozzle at 20 bar and 50 °C with a velocity of 80 m/s and leaves with a velocity of 300 m/s. If the area ratio of the nozzle is 4 : 1. The exit pressure (in bar) of the air is
[Take Cp = 1.0 kJ/kgK for air]
[Take Cp = 1.0 kJ/kgK for air]
Question 12
The internal energy of a certain system is a function of temperature alone and is given by formula E = 25 + 0.25 t kJ (where t is the temperature). If this system executes a process for which the work done by it per degree temperature increase is 0.75 kN-m, the heat-interaction per degree temperature increase is _________ kJ.
- 550 attempts
- 2 upvotes
- 2 comments
Apr 26ESE & GATE ME