Time Left - 12:00 mins

ESE Prelims 2022 Achievers Quiz 6

Attempt now to get your rank among 98 students!

Question 1

The resection by the two-point problem as compared to the three-point problem

I. is more accurate

II. is faster

III. is less laborious

IV. is simpler

Question 2

A curve of radius 385 m is to be set by taking radial offset from tangents. Calculate the offset at a distance of 20 m and 40 m along the tangent.

Question 3

In a felted aerial photograph, if the swing is 250° then the rotation angle is equal to ______.

Question 4

Match the column with list I (type of soil) and list II (made of Transportation)

Question 5

The method of orientation used, when the plane table occupies a position not yet located on the map, is called as

Question 6

A simply supported beam of span L and constant width b carries a point load W at mid span. The depth of the beam required at the mid-span for max. extreme fibre stress, is

Question 7

The principle stress at a point in an elastic material are σ (Compressive),

2σ (tensile), σ(tensile). The elastic limit in tension is 200 MPa and μ = 0.3. Value of σ at faiture when computed by maximum strain energy theory.

Question 8

A vertical photograph of a chimney was taken from an elevation of 400 m above MSL the elevation of the base of the chimney was 200 m. If the relief displacement of the top of the chimney was 42.5 mm and the radial distance of the image of the top of the chimney was 90 mm, the height of the chimney is

Question 9

A solid rectangular section having width b and depth h is subjected to a moment such that maximum stresses are developed in the beam in the extreme fibre. The length of lever arm is

Question 10

The graphical representation of maximum distortion energy theory is of the shape
  • 98 attempts
  • 0 upvotes
  • 0 comments
Sep 15ESE & GATE CE