Time Left - 12:00 mins
ESE Prelims 2022 Achievers Quiz 20
Attempt now to get your rank among 724 students!
Question 1
Two particles with masses in the ratio 1:4 are moving with equal kinetic energies. The magnitude of their linear momentums will conform to the ratio
Question 2
A block whose mass is 650 gm is fastened to a spring of spring constant K equals 65 N/m whose other end is fixed. The block is pulled a distance x = 11 cm from its equilibrium position at x = 0 on a smooth surface, and released from rest at t=0. The maximum speed ‘S ’ of the oscillating
Question 3
A thin cylindrical shell of diameter (d), length(l) and thickness (t) is subjected to an internal pressure(p).The ratio of the longitudinal strain to hoop strain is _______.
Question 4
Which of the following Metal has Maximum Thermal conductivity?
Question 5
The main advantage of line organization is its
Question 6
In a hole-shaft assembly, size of the hole is 20 ± 0.03 mm. The basic size of shaft is 19.50 mm. if the maximum interference in this assembly is 5 μm, what will be the upper deviation of the shaft __________(in μm)?
Question 7
Determine the number of Degrees of freedom (DOF) for a mechanism of planar linkage with nine simple revolute joints & eight links?
Question 8
What is the value of critical damping coefficient for a system employing mass of 8kg and the elastic stiffness is 4.5kg/.
Question 9
The peak load on a power plant is 40 MW and a group of four loads having maximum demand of 15 MW, 12 MW, 18 MW and 5 MW respectively are connected to the plant. The capacity of the plant is 60 MW. What is diversity factor of the plant?
Question 10
For a thin spherical pressure vessel, volumetric strain developed in the wall will be _____.
- 724 attempts
- 0 upvotes
- 15 comments
Tags :
ESE & GATE MEGeneralFeb 8ESE & GATE ME