Time Left - 12:00 mins
ESE Prelims 2022 Achievers Quiz 1
Attempt now to get your rank among 217 students!
Question 1
Heat is generated steadily in a 3 cm diameter spherical ball. The ball is exposed to ambient air at 26oC with a heat transfer coefficient of 7.5 W/m2-oC. The ball is to be covered with a material of thermal conductivity 0.15 W/m-oC. If the ball surface temperature remains as constant, the thickness of the covering material that will maximize heat generation within the ball, is _________.
Question 2
What is the optimum length of time between orders in EOQ model with a total time horizon of one year?
Question 3
The maximum interference in mm after assembly between a bush of size mm and shaft mm of size is __________.
Question 4
A full journal bearing having diametral clearance to diameter ratio of using a lubricant with viscosity (Z) of Pa-s, support the shaft journal running at N = 2400 rpm. If bearing pressure is 1.4 MPA. The Sommerfeld number is ____.
Question 5
A flywheel of moment of inertia 9.8 kg m2 fluctuates by 30 rpm, if the fluctuation in the speed is not to exceed ±3%, Then the mean angular speed of the flywheel is. Take ∆E = 3 kJ
Question 6
Coefficient of restitution is
Question 7
Choose the correct statement about the effect of changing various operating conditions of a vapour compression refrigeration cycle:
Question 8
What is the magnification factor in the case of steady state response when frequency ratio is 0.8 is_____
(neglect damping effects)
Question 9
In an internal combustion engine, during the compression stroke the heat rejected to the cooling water is 50 kJ/kg and the work input is 100 kJ/kg. What is the change in internal energy of the working fluid ?
Question 10
The entry nozzle angle of an elementary Impulse turbine is . For maximal diagram efficiency, calculate the ratio
- 217 attempts
- 0 upvotes
- 3 comments
Tags :
ESE & GATE MEGeneralJan 12ESE & GATE ME