Time Left - 12:00 mins
ESE EE 2021 Technical Quiz 13
Attempt now to get your rank among 232 students!
Question 1
If the numerator of a second order transfer function F(s) is a constant, then that represents which type of filter?
Question 2
Consider a logic circuit with three inputs A, B, C and an output Z that goes LOW only when A is HIGH while B and C are different. The simplified Boolean expression for Z in terms of inputs is
Question 3
In the given circuit, the race around condition
Question 4
A 4-bit asynchronous ripple counter is designed by using JK flip-flops with a square wave frequency of 100 kHz. The maximum permissible propagation delay of each flip flop should be
Question 5
Which of the following subtraction operations results in F16?
(1) (BA)16 – (AB)16
(2) (BC)16 – (CB)16
(3) (CB)16 – (BC)16
Select the correct answer using the code given below:
(1) (BA)16 – (AB)16
(2) (BC)16 – (CB)16
(3) (CB)16 – (BC)16
Select the correct answer using the code given below:
Question 6
For emitter coupled logic, the switching speed is very high because
Question 7
How many bits are requires at the input of a converter to achieve a resolution of 10 mV, if full scale is + 5V
Question 8
The equivalent inductance of the following circuit will be:
where, L1 = 2H, L2 = 3H, L3 = 4H
M12 = 1H, M23 = 1.5H, M13 = 2H
Question 9
Consider a source free series RLC circuit with R = 1 Ω, L = 0.25 H and C = 4/3 F. It is given that initial current in the circuit is 8 A and the initial voltage across capacitor is zero.
The voltage Vc(t) across the capacitor for t > 0 will be
The voltage Vc(t) across the capacitor for t > 0 will be
Question 10
When the dependent sources are present in the circuit, then which of the following theorem's cannot be applied.?
- 232 attempts
- 1 upvote
- 2 comments
Tags :
ESE & GATE EEGeneralMar 23ESE & GATE EE