Time Left - 06:00 mins
ESE 2021 Technical Quiz || Commutation Techniques (App update required to attempt this test)
Attempt now to get your rank among 138 students!
Question 1
For also A commutation (Load commutation) the commutation circuit parametric L = 20 μH, C = 50 μF. For proper commutation what will be the value of load resistance
Question 2
In a current cumulated chopper, peak commutating current is twice that of the maximum possible load current. The source voltage is 250 V dc and main SCR take off time is 50 μs. Voltage is 250 V dc and main SCR taken off time is 50 μs. If maximum load current is 250 A, then peak capacitor voltage is………V.
Question 3
Class C commutation is shown in figure. Considering a safety factor of 2, what should be the value of capacitor C if the turn off time of both thyristors is 10μsecs?
Question 4
In resonant pulse commutation, C = 30 μF and L = 5 μH. Initial voltage across capacitor = VS = VC = 240 V. If the constant load current of 240 A, then circuit then of time for main thyristor is______μsec.
Question 5
The circuit employing class C commutation, has Vs = 200 V, R1 = 60 Ω and R2 = 90 Ω. The peak value of current iT2 through thyristor is ……. A.
- 138 attempts
- 0 upvotes
- 1 comment
Jun 11ESE & GATE EE