Time Left - 18:00 mins

EC QUIZ -5

Attempt now to get your rank among 104 students!

Question 1

In the network shown in the figure, all resistor s are identical with R = 300 Ω. The resistance Rab (in Ω) of the network is ___________.
Description: D:\GradeStack Courses\GATE Tests (Sent by Ravi)\GATE EC 10-Mar\GATE-ECE-2015-Paper-1_files\image037.jpg

Question 2

For the given circuit emitter voltage is VE = 2 V. The value of α is _______

Question 3

A sinusoidal message signal is converted to a PCM signal using a uniform quantizer. The required signal-to-quantization noise ratio (SQNR) at the output of the quantizer is 40dB. The minimum number of bits per sample needed to achieve the desired SQNR is _______

Question 4

The resistivity of a semiconductor sample is 0.00912 ohm-m at 300K. If B = 0.48 Weber/m2. Hall angle for a hall coefficient of 3.55 × 10–4m3/c is

Question 5

In the arrangement of resistance shown below, the effective resistances between points A and B is

Question 6

Calculate depletion layer width in Si for the given C-V characteristics. Assume permittivity of Si and SiO2 are 10–12 F/cm & 4 × 10–13 F/cm area is 10–4 cm2

Question 7

Consider a silicon sample of length L = 5 cm and cross sectional area is 25 cm2. It is doped by Al atom uniformly with NA = 1016/cm3. The mobility of electrons and holes are 1200 cm2/V-sec and 350 cm2/V-sec respectively. Find the resistance offered by that sample is____ (ni = 1010/cm2, kT/q = 26 mV).

Question 8

The approximated value of hysteresis voltage for the Schmitt trigger circuit shown in figure below,

Question 9

The mean square value of the Random variable X, whose PDF is shown below is ________

Question 10

Find open loop transfer function of a unity feedback system having second order, whose step response is shown in figure.

  • 104 attempts
  • 0 upvotes
  • 0 comments
May 13ESE & GATE EC