Correction In Latitude By Bowditch Rule Is Given By

Answer: A. Total error in latitude x length of that side/perimeter of traverse

Correction in latitude by Bowditch rule is given by total error in latitude x length of that side/perimeter of traverse

Solution

Arbitrary Method: Surveyors alter measurements based on their collective experience.

Bowditch Method: It is adopted when both the linear and angular measurements are taken with extremely high accuracy. The Bowditch rule states that error in angular measurement is inversely proportional to square root of line length and error in linear measurement is directly proportional to square root of line length.

Correction= total error in latitude/departure×length of that side/perimeter of traverse

Correction in latitude by Bowditch rule is given by total error in latitude x length of that side/perimeter of traverse.

Graphical Method: Its foundation is the Bowditch rule. It is typically employed in compass traversing.

Transit Method: It is used when an angular measurement is more exact than traversing measurement. Only linear measurements were impacted by this strategy.

Axis Method: Only length is corrected using this method. It is used when the angular measurement is more accurate.

☛ Related Questions:

• Workability of concrete is measured by
• As the percentage of steel increases
• Reconnaissance is best done with the help of
• Hydrographic surveys deals with the mapping of