Time Left - 15:00 mins
Compensators & Controllers Starter Quiz
Attempt now to get your rank among 51 students!
Question 1
A compensator with transfer function . If then the compensator can give the minimum phase at a frequency of
Question 2
Consider the compensation network as shown in the figure below
What is the maximum phase provided by the network.
Question 3
An uncompensated open transfer function is given below
It is desired that the velocity error constant of compensated system to be 20. The required compensator is given by . The value of α = is ________.
Question 4
If the maximum phase provided by the compensator is 30° and this is achieved at √6 rad/sec. The ratio of pole to zero for the compensator transfer function will be______.
Question 5
The lead compensator has pole at s =-4 and a zero at s =-2. Then the maximum phase lead ɸm and corresponding frequency ωm is respectively?
Question 6
The block diagram of a control system is shown below.
The control specifications are that the damping ratio of the closed loop system is 0.6 and a damped natural frequency ωd is 10 rad/sec. The parameters of PD controller Kp and Kv are respectively
Question 7
A double integrator plant G(s) = H(s) = 1 is to be compensated to achieve the damping ratio and an undamped natural frequency, ωn = 5 rad/sec. Which one of the following compensator Ge(s) will be suitable?
- 51 attempts
- 0 upvotes
- 0 comments
Aug 26ESE & GATE EC